In physics, the angular velocity is defined as the rate of change of angular displacement and is a vector quantity (more precisely, a pseudovector) which specifies the angular speed (rotational speed) of an object and the axis about which the object is rotating. The SI unit of angular velocity is radians per second, although it may be measured in other units such as degrees per second, degrees per hour, etc. Angular velocity is usually represented by the symbol omega (ω, rarely Ω).
- 1 Angular velocity of a particle
- 2 Rotating frames
- 2.1 Angular velocity vector for a frame
- 2.2 Angular velocity tensor
- 2.3 Properties of angular velocity tensors
- 2.4 Coordinate-free description
- 2.5 Angular velocity as a vector field
- 3 Rigid body considerations
- 4 See also
- 5 References
- 6 External links
The angular velocity of a particle is measured around or relative to a point, called the origin. As shown in the diagram (with angles ɸ and θ in radians), if a line is drawn from the origin (O) to the particle (P), then the velocity (v) of the particle has a component along the radius (radial component, v‖) and a component perpendicular to the radius (cross-radial component, v⊥). If there is no radial component, then the particle moves in a circle. On the other hand, if there is no cross-radial component, then the particle moves along a straight line from the origin.
A radial motion produces no change in the direction of the particle relative to the origin, so for purposes of finding the angular velocity the radial component can be ignored. Therefore, the rotation is completely produced by the perpendicular motion around the origin, and the angular velocity is completely determined by this component.
In two dimensions the angular velocity ω is given by
This is related to the cross-radial (tangential) velocity by:1
An explicit formula for v⊥ in terms of v and θ is:
Combining the above equations gives a formula for ω:
In two dimensions the angular velocity is a single number that has no direction, but it does have a sense or orientation. In two dimensions the angular velocity is a pseudoscalar, a quantity that changes its sign under a parity inversion (for example if one of the axes is inverted or if they are swapped). The positive direction of rotation is taken, by convention, to be in the direction towards the y axis from the x axis. If parity is inverted, but the sense of a rotation does not, then the sign of the angular velocity changes.
There are three types of angular velocity involved in the movement on an ellipse corresponding to the three anomalies (true, eccentric and mean).
In three dimensions, the angular velocity becomes a bit more complicated. The angular velocity in this case is generally thought of as a vector, or more precisely, a pseudovector. It now has not only a magnitude, but a direction as well. The magnitude is the angular speed, and the direction describes the axis of rotation. The right-hand rule indicates the positive direction of the angular velocity pseudovector.
Being a unitary vector over the instantaneous rotation axis, so that from the top of the vector the rotation is counter-clock-wise the angular velocity vector can be defined as:
Just as in the two dimensional case, a particle will have a component of its velocity along the radius from the origin to the particle, and another component perpendicular to that radius. The combination of the origin point and the perpendicular component of the velocity defines a plane of rotation in which the behavior of the particle (for that instant) appears just as it does in the two dimensional case. The axis of rotation is then a line normal to this plane, and this axis defined the direction of the angular velocity pseudovector, while the magnitude is the same as the pseudoscalar value found in the 2-dimensional case. Using the unit vector defined before, the angular velocity vector may be written in a manner similar to that for two dimensions:
which, by the definition of the cross product, can be written:
If a point rotates with in a frame which rotates itself with angular speed with respect to an external frame , we can define the addition of as the angular velocity vector of the point with respect to .
With this operation defined like this, angular velocity, which is a pseudovector, becomes also a real vector because it has two operations:
- An internal operation (addition) which is associative, commutative, distributive and with zero and unity elements
- An external operation (external product), with the normal properties for an external product.
This is the definition of a vector space. The only property that presents difficulties to prove is the commutativity of the addition. This can be proven from the fact that the velocity tensor W (see below) is skew-symmetric. Therefore is a rotation matrix and in a time dt is an infinitesimal rotation matrix. Therefore it can be expanded as
The composition of rotations is not commutative, but when they are infinitesimal rotations the first order approximation of the previous series can be taken and and therefore
Given a rotating frame composed by three unitary vectors, all the three must have the same angular speed in any instant. In such a frame each vector is a particular case of the previous case (moving particle), in which the module of the vector is constant.
Though it is just a particular case of the previous one, is a very important one for its relationship with the rigid body study, and special tools have been developed for this case. There are two possible ways to describe the angular velocity of a rotating frame: the angular velocity vector and the angular velocity tensor. Both entities are related and they can be calculated from each other.
It is defined as the angular velocity of each of the vectors of the frame, in a consistent way with the general definition.
It is known by the Euler's rotation theorem that for a rotating frame there exists an instantaneous axis of rotation in any instant. In the case of a frame, the angular velocity vector is over the instantaneous axis of rotation.
Any transversal section of a plane perpendicular to this axis has to behave as a two dimensional rotation. Thus, the magnitude of the angular velocity vector at a given time t is consistent with the two dimensions case.
Angular velocity is a vector defining an addition operation. Components can be calculated from the derivatives of the parameters defining the moving frame (Euler angles or rotation matrices)
As in the general case, the addition operation for angular velocity vectors can be defined using movement composition. In the case of rotating frames, the movement composition is simpler than the general case because the final matrix is always a product of rotation matrices.
As in the general case, addition is commutative
Substituting in the expression
any vector e of the frame we obtain , and therefore
As the columns of the matrix of the frame are the components of its vectors, this allows also to calculate from the matrix of the frame and its derivative.
- One axis of the reference frame (the precession axis)
- The line of nodes of the moving frame respect the reference frame (nutation axis)
- One axis of the moving frame (the intrinsic rotation axis)
Euler proved that the projections of the angular velocity pseudovector over these three axes was the derivative of its associated angle (which is equivalent to decompose the instant rotation in three instantaneous Euler rotations). Therefore:2
This basis is not orthonormal and it is difficult to use, but now the velocity vector can be changed to the fixed frame or to the moving frame with just a change of bases. For example, changing to the mobile frame:
where IJK are unit vectors for the frame fixed in the moving body. This example has been made using the Z-X-Z convention for Euler angles.3
The components of the angular velocity vector can be calculated from infinitesimal rotations (if available) as follows:
- As any rotation matrix has a single real eigenvalue, which is +1, this eigenvalue shows the rotation axis.
- Its module can be deduced from the value of the infinitesimal rotation.
It can be introduced from rotation matrices. Any vector that rotates around an axis with an angular speed vector (as defined before) satisfies:
We can introduce here the angular velocity tensor associated to the angular speed :
This tensor W(t) will act as if it were a operator :
Given the orientation matrix A(t) of a frame, we can obtain its instant angular velocity tensor W as follows. We know that:
As angular speed must be the same for the three vectors of a rotating frame, if we have a matrix A(t) whose columns are the vectors of the frame, we can write for the three vectors as a whole:
And therefore the angular velocity tensor we are looking for is:
In general, the angular velocity in an n-dimensional space is the time derivative of the angular displacement tensor which is a second rank skew-symmetric tensor.
In three dimensions angular velocity can be represented by a pseudovector because second rank tensors are dual to pseudovectors in three dimensions.
As . This can be read as a differential equation that defines A(t) knowing W(t).
And if the angular speed is constant then W is also constant and the equation can be integrated. The result is:
which shows a connection with the Lie group of rotations.
It is possible to prove that angular velocity tensor are skew symmetric matrices which means that a satisfies .
To prove it we start taking the time derivative of being R(t) a rotation matrix:
- because R(t) is a rotation matrix
Applying the formula (AB)t = BtAt:
Thus, W is the negative of its transpose, which implies it is a skew symmetric matrix.
The tensor is a matrix with this structure:
At any instant, , the angular velocity tensor represents a linear map between the position vectors and their velocity vectors of a rigid body rotating around the origin:
where we omitted the parameter, and regard and as elements of the same 3-dimensional Euclidean vector space .
The relation between this linear map and the angular velocity pseudovector is the following.
Because of W is the derivative of an orthogonal transformation, the
where is the wedge product of and .
Taking the dual vector L* of L we get
Introducing , as the Hodge dual of L*, and apply further Hodge dual identities we arrive at
Because is an arbitrary vector, from nondegeneracy of scalar product follows
For angular velocity tensor maps velocities to positions, it is a vector field. In particular, this vector field is a Killing vector field belonging to an element of the Lie algebra so(3) of the 3-dimensional rotation group SO(3). This element of so(3) can also be regarded as the angular velocity vector.
The same equations for the angular speed can be obtained reasoning over a rotating rigid body. Here is not assumed that the rigid body rotates around the origin. Instead it can be supposed rotating around an arbitrary point which is moving with a linear velocity V(t) in each instant.
To obtain the equations it is convenient to imagine a rigid body attached to the frames and consider a coordinate system that is fixed with respect to the rigid body. Then we will study the coordinate transformations between this coordinate and the fixed "laboratory" system.
As shown in the figure on the right, the lab system's origin is at point O, the rigid body system origin is at O' and the vector from O to O' is R. A particle (i) in the rigid body is located at point P and the vector position of this particle is Ri in the lab frame, and at position ri in the body frame. It is seen that the position of the particle can be written:
The defining characteristic of a rigid body is that the distance between any two points in a rigid body is unchanging in time. This means that the length of the vector is unchanging. By Euler's rotation theorem, we may replace the vector with where is a 3x3 rotation matrix and is the position of the particle at some fixed point in time, say t=0. This replacement is useful, because now it is only the rotation matrix which is changing in time and not the reference vector , as the rigid body rotates about point O'. Also, since the three columns of the rotation matrix represent the three versors of a reference frame rotating together with the rigid body, any rotation about any axis becomes now visible, while the vector would not rotate if the rotation axis were parallel to it, and hence it would only describe a rotation about an axis perpendicular to it (i.e., it would not see the component of the angular velocity pseudovector parallel to it, and would only allow the computation of the component perpendicular to it). The position of the particle is now written as:
Taking the time derivative yields the velocity of the particle:
where Vi is the velocity of the particle (in the lab frame) and V is the velocity of O' (the origin of the rigid body frame). Since is a rotation matrix its inverse is its transpose. So we substitute :
where is the previous angular velocity tensor.
Substituting ω for W into the above velocity expression, and replacing matrix multiplication by an equivalent cross product:
It can be seen that the velocity of a point in a rigid body can be divided into two terms – the velocity of a reference point fixed in the rigid body plus the cross product term involving the angular velocity of the particle with respect to the reference point. This angular velocity is the "spin" angular velocity of the rigid body as opposed to the angular velocity of the reference point O' about the origin O.
We have supposed that the rigid body rotates around an arbitrary point. We should prove that the angular velocity previously defined is independent from the choice of origin, which means that the angular velocity is an intrinsic property of the spinning rigid body.
See the graph to the right: The origin of lab frame is O, while O1 and O2 are two fixed points on the rigid body, whose velocity is and respectively. Suppose the angular velocity with respect to O1 and O2 is and respectively. Since point P and O2 have only one velocity,
The above two yields that
Since the point P (and thus ) is arbitrary, it follows that
If the reference point is the instantaneous axis of rotation the expression of velocity of a point in the rigid body will have just the angular velocity term. This is because the velocity of instantaneous axis of rotation is zero. An example of instantaneous axis of rotation is the hinge of a door. Another example is the point of contact of a pure rolling spherical rigid body.
- Angular acceleration
- Angular frequency
- Angular momentum
- Areal velocity
- Orthogonal group
- Rigid body dynamics
- Hibbeler, Russell C. (2009). Engineering Mechanics. Upper Saddle River, New Jersey: Pearson Prentice Hall. pp. 314, 153. ISBN 978-0-13-607791-6.(EM1)
- K.S.HEDRIH: Leonhard Euler (1707–1783) and rigid body dynamics
- "online tool to calculate angular speed vectors". Aeroengineering.info. Retrieved 2013-01-23.
- Rotations and Angular Momentum on the Classical Mechanics page of the website of John Baez, especially Questions 1 and 2.
- Symon, Keith (1971). Mechanics. Addison-Wesley, Reading, MA. ISBN 0-201-07392-7.
- Landau, L.D.; Lifshitz, E.M. (1997). Mechanics. Butterworth-Heinemann. ISBN 0-7506-2896-0.
|Look up angular velocity in Wiktionary, the free dictionary.|
|Wikimedia Commons has media related to Angular velocity.|