Calcium hydroxide

From Wikipedia, the free encyclopedia
Jump to: navigation, search
Calcium hydroxide
Calcium hydroxide
Identifiers
CAS number 1305-62-0 YesY
PubChem 14777
ChemSpider 14094 YesY
UNII PF5DZW74VN YesY
EC number 215-137-3
KEGG D01083 YesY
ChEBI CHEBI:31341 YesY
RTECS number EW2800000
Jmol-3D images Image 1
Image 2
Properties
Molecular formula Ca(OH)2
Molar mass 74.093 g/mol
Appearance white powder
Odor odorless
Density 2.211 g/cm3, solid
Melting point 580 °C (loses water)
Solubility in water 0.189 g/100 mL (0 °C)
0.173 g/100 mL (20 °C)
0.066 g/100 mL (100 °C)
Solubility product, Ksp 4.68×10−6
Solubility Soluble in glycerol and acids.
Insoluble in alcohol.
Acidity (pKa) 12.4
Basicity (pKb) 2.37
Refractive index (nD) 1.574
Thermochemistry
Std molar
entropy
So298
83 J·mol−1·K−11
Std enthalpy of
formation
ΔfHo298
−987 kJ·mol−11
Hazards
MSDS External MSDS
EU Index Corrosive (C), Irritant (Xi)
R-phrases R22, R34
S-phrases (S2), S24
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
Flash point Non-flammable
LD50 7340 mg/kg (oral, rat)
7300 mg/kg (mouse)
Related compounds
Other cations Magnesium hydroxide
Strontium hydroxide
Barium hydroxide
Related bases Calcium oxide
Supplementary data page
Structure and
properties
n, εr, etc.
Thermodynamic
data
Phase behaviour
Solid, liquid, gas
Spectral data UV, IR, NMR, MS
Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
 YesY (verify) (what is: YesY/N?)
Infobox references

Calcium hydroxide, traditionally called slaked lime, is an inorganic compound with the chemical formula Ca(OH)2. It is a colorless crystal or white powder and is obtained when calcium oxide (called lime or quicklime) is mixed, or "slaked" with water. It has many names including hydrated lime, builders' lime, slack lime, cal, or pickling lime. Calcium hydroxide is used in many applications, including food preparation. Limewater is the common name for a saturated solution of calcium hydroxide.

Properties

When heated to 512 °C, the partial pressure of water in equilibrium with calcium hydroxide reaches 101 kPa, which decomposes calcium hydroxide into calcium oxide and water.3

Ca(OH)2 → CaO + H2O

A suspension of fine calcium hydroxide particles in water is called milk of lime. The solution is called limewater and is a medium strength base that reacts with acids and attacks many metals. Limewater turns milky in the presence of carbon dioxide due to formation of calcium carbonate, a process called carbonatation:

Ca(OH)2 + CO2 → CaCO3 + H2O

Structure, preparation, occurrence

SEM image of fractured hardened cement paste, showing plates of calcium hydroxide and needles of ettringite (micron scale)

Calcium hydroxide adopts a polymeric structure, as do the related hydroxides of the alkaline earth metals. The packing resembles the cadmium iodide motif with layers of octahedral Ca centres. Strong hydrogen bonds exist between the layers.4

The structure of calcium hydroxide, with the hydrogen atoms omitted (purple = O centres).

Calcium hydroxide is produced commercially by treating lime with water:

CaO + H2O → Ca(OH)2

In the laboratory it can be prepared by mixing an aqueous solutions of calcium chloride and sodium hydroxide. The mineral form, portlandite, is relatively rare but can be found in some volcanic, plutonic, and metamorphic rocks. It has also been known to arise in burning coal dumps.

Uses

One significant application of calcium hydroxide is as a flocculant, in water and sewage treatment. It forms a fluffy charged solid that aids in the removal of smaller particles from water, resulting in a clearer product. This application is enabled by the low cost and low toxicity of calcium hydroxide. It is also used in fresh water treatment for raising the pH of the water so pipes will not corrode where the base water is acidic because it is self-regulating and does not raise the pH too much.

Another large application is in the paper industry, where it is used in the production of sodium hydroxide. This conversion is a component of the Kraft process.4

Niche uses

Because it is produced on a large scale, is easily handled, and is cheap, myriad niche and even large-scale applications have been described. A partial listing follows:

  • In life support systems as a carbon dioxide scrubber, particularly in closed-circuit diving re-breathers such as the US Navy LAR V or MK-16, where the more caustic lithium hydroxide is deemed too risky due to inhaled dust, combat handling, or generation of caustic "slurry" in flooding events
  • An ingredient in whitewash, mortar, and plaster
  • In road construction, to improve the quality of excessively plastic subgrade soils
  • To fill the root canal for the first stage of endodontic therapy (it is then replaced by rubber)
  • As an additive to sea water to reduce atmospheric CO2 and mitigate the greenhouse effect5
  • In the production of metals, lime is injected into the waste gas stream to neutralize acids, such as fluorides and chlorides prior to being released to atmosphere.
  • An alkali used as a lye substitute in no-lye hair relaxers
  • A chemical depilatory agent found in most hair removal creams (for example Nair)
  • In Bordeaux mixture to neutralize the solution and form a long-lasting fungicide
  • In lime-sulfur, it is mixed with sulfur and boiled in water for an hour. The ratio by weight of Ca(OH)2:S:water is about 1:1.7:8.7. Diluted (1:32) lime-sulfur is sprayed as a fungicide and used as a dip to combat sarcoptic mange.
  • In the petroleum refining industry for the manufacture of additives to oils (salicatic, sulphatic, fenatic)
  • In the chemical industry for manufacture of calcium stearate
    • In the petrochemical industry for manufacturing solid oil of various marks
    • In the manufacture of brake pads
    • In manufacturing the trademarked compound "Polikar", an antifungal and antimicrobial preservative for vegetables in storage
    • For preparation of dry mixes for painting and decorating
    • In manufacturing mixes for pesticides
    • In the manufacture of ebonite
    • As a calcium supplement and pH/carbonate buffer (known as Kalkwasser lit. trans. lime-water) for the aquaculture of corals in reef aquaria.
    • As a natural "alternative" insecticide, most crawling insects are killed by its touch, including ticks, fleas, beetles and grubs.

Food industry

Because of its low toxicity and the mildness of its basic properties, slaked lime is widely used in the food industry to:

Native American uses

Dry untreated corn (left), and treated corn (right) after boiling in water with calcium hydroxide (1 Tbsp lime for 500 g of corn) for 15 minutes

In Spanish, calcium hydroxide is called cal. Corn cooked with cal (nixtamalization) becomes hominy (nixtamal), which significantly increases the bioavailability of niacin, and it is also considered tastier and easier to digest.

In chewing areca nut or coca leaves, calcium hydroxide is usually chewed alongside to keep the alkaloid stimulants chemically available for absorption by the body. Similarly, Native Americans traditionally chewed tobacco leaves with calcium hydroxide derived from burnt mollusk shells to enhance the effects. It has also been used by some indigenous American tribes as an ingredient in yopo, a psychedelic snuff prepared from the beans of some Anadenanthera species.6

Afghan uses

It is used in making naswar (also known as nass or niswar), a type of dipping tobacco made from fresh tobacco leaves, calcium hydroxide (chuna), and wood ash. It is consumed most in the Pathan diaspora, Afghanistan, Pakistan, India and also in Sweden and Norway. Villagers also use calcium hydroxide as a paint on to their mud houses in Afghanistan and Pakistan.

Ancient Celtic use

According to Diodorus Siculus:

"The Gauls are tall of body with rippling muscles and white of skin and their hair is blond, and not only naturally so for they also make it their practice by artificial means to increase the distinguishing colour which nature has given it. For they are always washing their hair in limewater and they pull it back from the forehead to the nape of the neck, with the result that their appearance is like that of Satyrs and Pans since the treatment of their hair makes it so heavy and coarse that it differs in no respect from the mane of horses." —Diodorus Siculus

Health risks

Unprotected exposure to Ca(OH)2 can pose health risks, so should be limited. It can cause severe skin irritation, chemical burns, blindness, or lung damage. See MSDS.2

See also

References

  1. ^ a b Zumdahl, Steven S. (2009). Chemical Principles 6th Ed. Houghton Mifflin Company. p. A21. ISBN 0-618-94690-X. 
  2. ^ a b "MSDS Calcium hydroxide". Retrieved 2011-06-21. 
  3. ^ Halstead, P.E.; Moore, A.E. (1957). "The Thermal Dissociation Of Calcium Hydroxide". Journal of the Chemical Society 769: 3873. doi:10.1039/JR9570003873. 
  4. ^ a b Greenwood, N. N.; & Earnshaw, A. (1997). Chemistry of the Elements (2nd Edn.), Oxford:Butterworth-Heinemann. ISBN 0-7506-3365-4.
  5. ^ O,Driscoll, Catherine (21 July 2008). "A dash of lime -- a new twist that may cut CO2 levels back to pre-industrial levels". Chemistry. PhysOrg.com. Retrieved 20 November 2010. 
  6. ^ A multidisciplinary overview of intoxicating snuff rituals in the Western Hemisphere, Peter A. G. M. de Smet, doi:10.1016/0378-8741(85)90060-1

External links








Creative Commons License