|Jmol-3D images||Image 1
|Molar mass||118.01 g mol−1|
|Density||1.201 g cm−3|
|Melting point||197 °C; 387 °F; 470 K|
|Boiling point||250 °C; 482 °F; 523 K (decomposes)|
|Solubility in water||1666.6 g/L|
| (what is: / ?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
The term chromic acid is usually used for a mixture made by adding concentrated sulfuric acid to a dichromate, which may contain a variety of compounds, including solid chromium trioxide. This kind of chromic acid may be used as a cleaning mixture for glass. Chromic acid may also refer to the molecular species, H2CrO4 of which the trioxide is the anhydride. Chromic acid features chromium in an oxidation state of +6 (or VI). It is a strong and corrosive oxidising agent.
- H2CrO4 [HCrO4− + H+
The pKa for the equilibrium is not well characterized. Reported values vary between about −0.8 to 1.6.1 The value at zero ionic strength is difficult to determine because half dissociation only occurs in very acidic solution, at about pH zero, that is, with an acid concentration of about 1 mol dm−3. A further complication is that the ion [HCrO4− has a marked tendency to dimerize, with the loss of a water molecule, to form the dichromate ion, [Cr2O72−:
- 2 [HCrO4− [Cr2O72− + H2O, log KD = 2.05.
Furthermore, the dichromate can be protonated:
- [HCr2O7− [Cr2O72− + H+, pK = 1.82
The pK value for this reaction shows that it can be ignored at pH > 4.
Loss of the second proton occurs in the pH range 4–8, making the ion [HCrO4− a weak acid.
Molecular chromic acid could in principle be made by adding chromium trioxide to water (cf. manufacture of sulfuric acid).
- CrO3 + H2O H2CrO4
but in practice the reverse reaction occurs when molecular chromic acid is dehydrated. This is what happens when concentrated sulfuric acid is added to a dichromate solution. At first the colour changes from orange (dichromate) to red (chromic acid) and then deep red crystals of chromium trioxide precipitate from the mixture, without further colour change. The colours are due to LMCT charge transfer transitions.
Dichromic acid, H2Cr2O7, (structure illustrated top right) is the fully protonated form of the dichromate ion and also can be seen as the product of adding chromium trioxide to molecular chromic acid.
- [Cr2O72− + 2H+ H2Cr2O7 H2CrO4 + CrO3
It is probably present in chromic acid cleaning mixtures along with the mixed chromic-sulfuric acid H2CrSO7.citation needed
Chromic acid is an intermediate in chromium plating, and is also used in ceramic glazes, and colored glass. Because a solution of chromic acid in sulfuric acid (also known as a sulfochromic mixture or chromosulfuric acid) is a powerful oxidizing agent, it can be used to clean laboratory glassware, particularly of otherwise insoluble organic residues. This application has declined due to environmental concerns.3 Furthermore the acid leaves trace amounts of paramagnetic chromic ions — Cr(III) — that can interfere with certain applications, such as NMR spectroscopy. This is especially the case for NMR tubes.4
Chromic acid was widely used in the instrument repair industry, due to its ability to "brighten" raw brass. A chromic acid dip leaves behind a bright yellow patina on the brass. Due to growing health and environmental concerns, many have discontinued use of this chemical in their repair shops.
Chromic acid is capable of oxidizing many kinds of organic compounds and many variations on this reagent have been developed:
- Chromic acid in aqueous sulfuric acid and acetone is known as the Jones reagent, which will oxidize primary and secondary alcohols to carboxylic acids and ketones respectively, while rarely affecting unsaturated bonds.5
- Pyridinium chlorochromate is generated from chromium trioxide and pyridinium chloride. This reagent converts primary alcohols to the corresponding aldehydes (R-CHO).5
- Collins reagent is an adduct of chromium trioxide and pyridine used for diverse oxidations.
- Chromyl chloride, CrO2Cl2 is a well-defined molecular compound that is generated from chromic acid.
- Oxidation of methylbenzenes to benzoic acids.6
- Oxidative scission of indene to homophthalic acid.7
- Oxidation of secondary alcohol to ketone (cyclooctanone)8 and nortricyclanone.9
In organic chemistry, dilute solutions of chromic acid can be used to oxidize primary or secondary alcohols to the corresponding aldehydes and ketones. Tertiary alcohol groups are unaffected. Because of the oxidation is signaled by a color change from orange to a blue-green, chromic acid is used as a qualitative analytical test for the presence of primary or secondary alcohols.5
In oxidations of alcohols or aldehydes into carboxylic acids, chromic acid is one of several reagents, including several that are catalytic. For example nickel(II) salts catalyze oxidations by bleach (hypochlorite).10 Aldehydes are relatively easily oxidised to carboxylic acids, and mild oxidising agents are sufficient. Silver(I) compounds have been used for this purpose. Each oxidant offers advantages and disadvantages. Instead of using chemical oxidants, electrochemical oxidation is often possible.
Hexavalent chromium compounds (including chromium trioxide, chromic acids, chromates, chlorochromates) are toxic and carcinogenic. For this reason, chromic acid oxidation is not used on an industrial scale except in the aerospace industry.
- IUPAC SC-Database A comprehensive database of published data on equilibrium constants of metal complexes and ligands
- Brito, F.; Ascanioa, J.; Mateoa, S.; Hernándeza, C.; Araujoa, L.; Gili, P.; Martín-Zarzab, P.; Domínguez, S.; Mederos, A. (1997). "Equilibria of chromate(VI) species in acid medium and ab initio studies of these species". Polyhedron 16 (21): 3835–3846. doi:10.1016/S0277-5387(97)00128-9.
- J. M. McCormick (2006-06-30). "Cleaning Glassware". Truman State University.
- "NMR-010: Proper Cleaning Procedures for NMR Sample Tubes". Wilmad. Retrieved 2008-06-27.
- Freeman, F. "Chromic Acid" Encyclopedia of Reagents for Organic Synthesis (2001) John Wiley & Sons, doi:10.1002/047084289X.rc164
- Kamm O.; Matthews, A. O. (1941), "p-Nitrobenzoic Acid", Org. Synth.; Coll. Vol. 1: 392
- Grummitt, O.; Egan, R.; Buck, A., "Homophthalic Acid and Anhydride", Org. Synth.; Coll. Vol. 3: 449 (1955
- Eisenbraun, E. J., "Cyclooctanone", Org. Synth.; Coll. Vol. 5: 310 (1973
- Meinwald, J.; Crandall, J.; Hymans W. E., "Nortricyclanone", Org. Synth.; Coll. Vol. 5: 866
- J. M. Grill, J. W. Ogle, S. A. Miller (2006). "An Efficient and Practical System for the Catalytic Oxidation of Alcohols, Aldehydes, and α,β-Unsaturated Carboxylic Acids". J. Org. Chem. 71 (25): 9291–9296. doi:10.1021/jo0612574. PMID 17137354.
- International Chemical Safety Card 1194
- NIOSH Pocket Guide to Chemical Hazards 0138
- IARC Monograph "Chromium and Chromium compounds"