Parts of a tooth, including dentine
Dentin (//) (American English) or dentine (// or //) (UK English) (Latin: substantia eburnea) is a calcified tissue of the body, and along with enamel, cementum, and pulp is one of the four major components of teeth. It is usually covered by enamel on the crown and cementum on the root and surrounds the entire pulp. By weight, 70% of dentin consists of the mineral hydroxylapatite, 20% is organic material, and 10% is water.1 Yellow in appearance, it greatly affects the color of a tooth due to the translucency of enamel. Dentin, which is less mineralized and less brittle than enamel, is necessary for the support of enamel.2 Dentin rates approximately 3 on the Mohs scale of mineral hardness.3
Dentinal sclerosis/transparent dentin-sclerosis of primary dentin is regressive alteration in tooth characterized by calcification of dentinal tubules.it can occur as a result of injury to dentin by caries or abrasion.also manifestation of normal aging process.
The formation of dentin, known as dentinogenesis, begins prior to the formation of enamel and is initiated by the odontoblasts of the pulp. Dentin is derived from the dental papilla of the tooth germ.4 After apposition of predentin and maturation into dentin, the cell bodies of the odontoblasts remain in the pulp inside the tooth, along its outer wall. Unlike enamel, dentin continues to form throughout life and can be initiated in response to stimuli, such as tooth decay or attrition.
Unlike enamel, dentin may be demineralized and stained for histological study. Dentin consists of microscopic channels, called dentinal tubules, which radiate outward through the dentin from the pulp to the exterior cementum or enamel border.5 The dentinal tubules extend from the dentinoenamel junction (DEJ) in the crown area, or dentinocemental junction (DCJ) in the root area, to the outer wall of the pulp.4 These tubules contain fluid and cellular structures. As a result, dentin has a degree of permeability, which can increase the sensation of pain and the rate of tooth decay. The strongest held theory of dentinal hypersensitivity suggests that it is due to changes in the dentinal fluid associated with the processes, a type of hydrodynamic mechanism.46
Dentin is bone-like matrix characterized by multiple closely packed dentinal tubules that traverse its entire thickness and contain the cytoplasmic extensions of odontoblasts that once formed the dentin and maintain it. The cell bodies of the odontoblasts are aligned along the inner aspect of dentin against a layer of predentin where they also form the peripheral boundary of the dental pulp.7
In areas where both primary and secondary mineralization have occurred with complete crystalline fusion, these appear as lighter rounded areas on a stained section of dentin and are considered globular dentin. In contrast, the darker arclike areas in a stained section of dentin are considered interglobular dentin. In these areas, only primary mineralization has occurred within the predentin, and the globules of dentin do not fuse completely. Thus, interglobular dentin is slightly less mineralized than globular dentin. Interglobular dentin is especially evident in coronal dentin, near the dentinoenamel junction (DEJ), and in certain dental anomalies, such as in dentinogenesis imperfecta.4
There are three types of dentin, primary, secondary and tertiary.89 Secondary dentin is a layer of dentin produced after the root of the tooth is completely formed. Tertiary dentin is created in response to a stimulus, such as a carious attack.
Primary dentin, the most prominent dentin in the tooth, lies between the enamel and the pulp chamber. The outer layer closest to enamel is known as mantle dentin. This layer is unique to the rest of primary dentin. Mantle dentin is formed by newly differentiated odontoblasts and forms a layer approximately 150 micrometers wide. Unlike primary dentin, mantle dentin lacks phosphorylation, has loosely packed collagen fibrils and is less mineralized. Below it lies the circumpulpal dentin, a more mineralized dentin which makes up most of the dentin layer and is secreted after the mantle dentin by the odontoblasts. Circumpulpal dentin is formed before the root formation is completed.
Newly secreted dentin is unmineralised and is called predentin. It is easily identified in haematoxylin and eosin stained sections since it stains less intensely than dentin. It is usually 10-47 micrometer and lines the innermost region of the dentin. It is unmineralized and consists of collagen, glycoproteins and proteoglycans. It is similar to osteoid in bone and is thickest when dentinogenesis is occurring.1
Secondary dentin is formed after root formation is complete, normally after the tooth has erupted and is functional. It grows much more slowly than primary dentin, but maintains its incremental aspect of growth. It has a similar structure to primary dentin, although its deposition is not always even around the pulp chamber. It is the growth of this dentin that causes the decrease in the size of the pulp chamber with age. This is clinically known as pulp recession; cavity preparation in young patients therefore carries a greater risk of exposing the pulp. If this occurs, the pulp can be treated by different therapies such as direct pulp capping. Pulp capping is most successful if followed by a stainless steel crown. In order to maintain space in the primary dentition, attempts are made not to extract a pulpal exposure.
Tertiary dentin is dentin formed as a reaction to external stimulation such as cavities. It is of two types, either reactionary, where dentin is formed from a pre-existing odontoblast, or reparative, where newly differentiated odontoblast-like cells are formed due to the death of the original odontoblasts, from a pulpal progenitor cell. Tertiary dentin is only formed by an odontoblast directly affected by a stimulus; therefore, the architecture and structure depend on the intensity and duration of the stimulus, e.g., if the stimulus is a carious lesion, there is extensive destruction of dentin and damage to the pulp, due to the differentiation of bacterial metabolites and toxins. Thus, tertiary dentin is deposited rapidly, with a sparse and irregular tubular pattern and some cellular inclusions; in this case it is referred to as "osteodentin". However, if the stimulus is less active, it is laid down less rapidly with a more regular tubular pattern and hardly any cellular inclusions.10
Elephant ivory is solid dentin. The structure of the dentinal tubules contributes to both its porosity (useful for piano keys) and its elasticity (useful for billiard balls.) Elephant tusks are formed with a thin cap of enamel, which soon wears away, leaving the dentin exposed. Exposed dentin in humans causes the symptom of sensitive teeth.
Because dentin is softer than enamel, it wears away more quickly than enamel. Some mammalian teeth exploit this phenomenon, especially herbivores such as horses, deer or elephants. In many herbivores, the occlusal (biting) surface of the tooth is composed of alternating areas of dentin and enamel. Differential wearing causes sharp ridges of enamel to be formed on the surface of the tooth (typically a molar), and to remain during the working life of the tooth. Herbivores grind their molars together as they chew (masticate), and the ridges help to shred tough plant material.
- CELLS AND EXTRACELLULAR MATRICES OF DENTIN AND PULP: A BIOLOGICAL BASIS FOR REPAIR AND TISSUE ENGINEERING, Michel Goldberg, at http://cro.sagepub.com/content/15/1/13.full
- Sanjay Miglani, Vivek Aggarwal, and Bhoomika Ahuja, Dentin hypersensitivity: Recent trends in management, J Conserv Dent. 2010 Oct-Dec at http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3010026/
- Ten Cate's Oral Histology, Nanci, Elsevier, 2013, page 194
- Johnson, Clarke. "Biology of the Human Dentition." Page accessed July 18, 2007.
- Marshall GW Jr, Marshall SJ, Kinney JH, Balooch M.J. The dentin substrate: structure and properties related to bonding J Dent. 1997 Nov;25(6):441-58.
- Illustrated Dental Embryology, Histology, and Anatomy, Bath-Balogh and Fehrenbach, Elsevier, 2011, page 156.
- Ross, Michael H., Gordon I. Kaye, and Wojciech Pawlina, 2003. Histology: a text and atlas. 4th edition. Page 450. ISBN 0-683-30242-6.
- Addy M. Dentine Hypersensitivity. New perspectives on an old problem. Int Dent J (2002) 52; 367-375.
- Marshall GW Jr. Dentin: microstructure and characterization. Quintessence Int. 1993 Sep;24(9):606-17.
- U. Zilberman, P. Smith. Sex- and Age-related Differences in Primary and Secondary Dentin Formation Advances in Dental Research, Vol 15, Issue 1, pp.42-45, August, 2001. Retrieved from iadrjournals.org
- Donna J. Phinney, Judy Helen Halstead Delmar's Dental Assisting: A Comprehensive Approach, p.97, Thomson Delmar Learning, ISBN 0-7668-0731-2
- J.H. Kinneya, R.K. Nallab, J.A. Poplec, T.M. Breunigd, R.O. Ritchieb, Age-related transparent root dentin: mineral concentration, crystallite size, and mechanical properties, Biomaterials. (2005) 3363–3376 at http://www.lbl.gov/ritchie/Library/PDF/Biomaterials(transparent-dentin).pdf