Effective population size
In population genetics, the concept of effective population size Ne was introduced by the American geneticist Sewall Wright.12 He defined it as "the number of breeding individuals in an idealised population that would show the same amount of dispersion of allele frequencies under random genetic drift or the same amount of inbreeding as the population under consideration". More generally, an effective population size may be defined as the number of individuals in an idealised population that has a value of any given population genetic quantity that is equal to the value of that quantity in the population of interest. The two population genetic quantities identified by Wright were the one-generation increase in variance across replicate populations (variance effective population size) and the one-generation change in the inbreeding coefficient (inbreeding effective population size). These two are closely linked, and derived from F-statistics, but they are not identical.3
Today, the effective population size is usually estimated empirically with respect to the sojourn or coalescence time, estimated as the within-species genetic diversity divided by the mutation rate.4 Another important effective population size is the selection effective population size 1/scritical, where scritical is the critical value of the selection coefficient at which selection becomes more important than genetic drift.5
However defined, the effective population size is usually less than the census population size (N).
- 1 Variance effective size
- 2 Inbreeding effective size
- 3 Coalescent effective size
- 4 Selection effective size
- 5 See also
- 6 References
- 7 External links
Let denote the same, typically larger, variance in the actual population under consideration. The variance effective population size is defined as the size of an idealized population with the same variance. This is found by equating with and solving for which gives
In Drosophila populations of census size 16, the variance effective population size has been measured as equal to 11.5.6 This measurement was achieved through studying changes in the frequency of a neutral allele from one generation to another in over 100 replicate populations.
In the following examples, one or more of the assumptions of a strictly idealised population are relaxed, while other assumptions are retained. The variance effective population size of the more relaxed population model is then calculated with respect to the strict model.
For example, say the population size was N = 10, 100, 50, 80, 20, 500 for six generations (t = 6). Then the effective population size is the harmonic mean of these, giving:
or more generally,
where D represents dioeciousness and may take the value 0 (for not dioecious) or 1 for dioecious.
When N is large, Ne approximately equals N, so this is usually trivial and often ignored:
If population size is to remain constant, each individual must contribute on average two gametes to the next generation. An idealized population assumes that this follows a Poisson distribution so that the variance of the number of gametes contributed, k is equal to the mean number contributed, i.e. 2:
However, in natural populations the variance is often larger than this. The vast majority of individuals may have no offspring, and the next generation stems only from a small number of individuals, so
The effective population size is then smaller, and given by:
Note that if the variance of k is less than 2, Ne is greater than N. In the extreme case of a population experiencing no variation in family size, in a laboratory population in which the number of offspring is artificially controlled, Vk = 0 and Ne = 2N.
Where Nm is the number of males and Nf the number of females. For example, with 80 males and 20 females (an absolute population size of 100):
Again, this results in Ne being less than N.
Alternatively, the effective population size may be defined by noting how the average inbreeding coefficient changes from one generation to the next, and then defining Ne as the size of the idealized population that has the same change in average inbreeding coefficient as the population under consideration. The presentation follows Kempthorne (1957).7
For the idealized population, the inbreeding coefficients follow the recurrence equation
Using Panmictic Index (1 − F) instead of inbreeding coefficient, we get the approximate recurrence equation
The difference per generation is
The inbreeding effective size can be found by solving
although researchers rarely use this equation directly.
When organisms live longer than one breeding season, effective population sizes have to take into account the life tables for the species.
Assume a haploid population with discrete age structure. An example might be an organism that can survive several discrete breeding seasons. Further, define the following age structure characteristics:
- Fisher's reproductive value for age ,
- The chance an individual will survive to age , and
- The number of newborn individuals per breeding season.
The generation time is calculated as
- average age of a reproducing individual
Then, the inbreeding effective population size is8
Similarly, the inbreeding effective number can be calculated for a diploid population with discrete age structure. This was first given by Johnson,9 but the notation more closely resembles Emigh and Pollak.10
Assume the same basic parameters for the life table as given for the haploid case, but distinguishing between male and female, such as N0ƒ and N0m for the number of newborn females and males, respectively (notice lower case ƒ for females, compared to upper case F for inbreeding).
The inbreeding effective number is
According to the neutral theory of molecular evolution, a neutral allele remains in a population for Ne generations, where Ne is the effective population size. An idealised diploid population will have a pairwise nucleotide diversity equal to 4Ne, where is the mutation rate. The sojourn effective population size can therefore be estimated empirically by dividing the nucleotide diversity by the mutation rate.4
The coalescent effective size may have little relationship to the number of individuals physically present in a population.11 Measured coalescent effective population sizes vary between genes in the same population, being low in genome areas of low recombination and high in genome areas of high recombination.1213 Sojourn times are proportional to N in neutral theory, but for alleles under selection, sojourn times are proportional to log(N). Genetic hitchhiking can cause neutral mutations to have sojourn times proportional to log(N): this may explain the relationship between measured effective population size and the local recombination rate.
In an idealised Wright-Fisher model, the fate of an allele, beginning at an intermediate frequency, is largely determined by selection if the selection coefficient s >> 1/N, and largely determined by neutral genetic drift if s << 1/N. In real populations, the cutoff value of s may depend instead on local recombination rates.514 This limit to selection in a real population may be captured in a toy Wright-Fisher simulation through the appropriate choice of Ne. Populations with different selection effective population sizes are predicted to evolve profoundly different genome architectures.1516
- Wright S (1931). "Evolution in Mendelian populations". Genetics 16 (2): 97–159. PMC 1201091. PMID 17246615.
- Wright S (1938). "Size of population and breeding structure in relation to evolution". Science 87 (2263): 430–431. doi:10.1126/science.87.2263.425-a.
- James F. Crow (2010). "Wright and Fisher on Inbreeding and Random Drift". Genetics 184 (3): 609–611. doi:10.1534/genetics.109.110023. PMC 2845331. PMID 20332416.
- Lynch M., Conery, J.S. (2003). "The origins of genome complexity". Science 302 (5649): 1401–1404.
- R.A. Neher and B.I. Shraiman (2011). "Genetic Draft and Quasi-Neutrality in Large Facultatively Sexual Populations". Genetics 188 (4): 975–996. doi:10.1534/genetics.111.128876. PMC 3176096. PMID 21625002.
- Buri, P (1956). "Gene frequency in small populations of mutant Drosophila". Evolution 10: 367–402.
- Kempthorne O (1957, ). An Introduction to Genetic Statistics. Iowa State University Press.
- Felsenstein J (1971). "Inbreeding and variance effective numbers in populations with overlapping generations". Genetics 68: 581–597.
- Johnson DL (1977). "Inbreeding in populations with overlapping generations". Genetics 87: 581–591.
- Emigh TH, Pollak E (1979). "Fixation probabilities and effective population numbers in diploid populations with overlapping generations". Theoretical Population Biology 15 (1): 86–107. doi:10.1016/0040-5809(79)90028-5.
- Gillespie, JH (2001). "Is the population size of a species relevant to its evolution?". Evolution 55: 2161–2169. doi:10.1111/j.0014-3820.2001.tb00732.x.
- Hahn, Matthew W. (2008). "Toward a selection theory of molecular evolution". Evolution 62: 255–265. doi:10.1111/j.1558-5646.2007.00308.x. PMID 18302709.
- Masel, Joanna (2012). "Rethinking Hardy–Weinberg and genetic drift in undergraduate biology". BioEssays 34 (8): 701–10. doi:10.1002/bies.201100178. PMID 22576789.
- Daniel B. Weissman, Nicholas H. Barton (2012). "Limits to the Rate of Adaptive Substitution in Sexual Populations". PLoS Genetics 8 (6): e1002740. doi:10.1371/journal.pgen.1002740.
- Lynch, Michael (2007). The Origins of Genome Architecture. Sinauer Associates. ISBN 0-87893-484-7.
- Rajon, E., Masel, J. (2011). "Evolution of molecular error rates and the consequences for evolvability". PNAS 108 (3): 1082–1087. doi:10.1073/pnas.1012918108. PMC 3024668. PMID 21199946.
- Holsinger, Kent (2008-08-26). "Effective Population Size". University of Connecticut.
- Whitlock, Michael (2008). "The Effective Population Size". Biology 434: Population Genetics. The University of British Columbia.
- http://www.kursus.kvl.dk/shares/vetgen/_Popgen/genetics/3/6.htm — on Københavns Universitet.