MPEG transport stream
|Internet media type||
|Type of format||Media container|
|Container for||Audio, video, data|
|Extended to||M2TS, TOD|
|Standard(s)||ISO/IEC 13818-1, ITU-T Recommendation H.222.0345|
MPEG transport stream (MPEG-TS, MTS or TS) is a standard format for transmission and storage of audio, video, and Program and System Information Protocol (PSIP) data.6 It is used in broadcast systems such as DVB, ATSC and IPTV.
Transport stream specifies a container format encapsulating packetized elementary streams, with error correction and stream synchronization features for maintaining transmission integrity when the signal is degraded.
Transport streams differ from the similarly named program streams in several important ways: program streams are designed for reasonably reliable media, such as discs (like DVDs), while transport streams are designed for less reliable transmission, namely terrestrial or satellite broadcast. Further, a transport stream may carry multiple programs.
- Composition of the various programs
- Elementary stream (ES) — audio or video (the below is for video only)
- Encoding block or just block—a DCT encoding block, 8x8 pixels
- Group of pictures (GOP) — providing random access points
- Macroblock—consisting of 6 to 12 DCT blocks
- Packetized elementary stream (PES)
- Slice — preventing an error from being propagated through intra prediction
A packet is the basic unit of data in a transport stream. It starts with a sync byte and a header. Additional optional transport fields, as signaled in the optional adaptation field, may follow. The rest of the packet consists of payload. Packets are 188 bytes in length, but the communication medium may add some error correction bytes to the packet. ISDB-T and DVB-T/C/S uses 204 bytes and ATSC 8-VSB, 208 bytes as the size of emission packets (transport stream packet + FEC data). ATSC transmission adds 20 bytes of Reed-Solomon forward error correction to create a packet that is 208 bytes long.7 The 188-byte packet size was originally chosen for compatibility with ATM systems.89
|sync byte||8||Bit pattern from bit 7 to 0 as 0x47 or ASCII char 'G'|
|Transport Error Indicator (TEI)||1||Set when a demodulator can't correct errors from FEC data,
this would inform a stream processor to ignore the packet 10
|Payload Unit Start Indicator||1||Boolean flag with a value of true meaning the start of|
|Transport Priority||1||Boolean flag with a value of true meaning the current packet
has a higher priority than other packets with the same PID.
|Scrambling control||2||'00' = Not scrambled.|
|Adaptation field exist||1||Boolean flag|
|Continuity counter||4||Sequence number of payload packets.
Incremented only when a payload is present (i.e., payload value is true)
|Note: the total number of bits above is 32 and is called the transport stream 4-byte prefix or Transport Stream Header.|
|Adaptation field||0 or more||If adaption field exist value is true|
|Payload Data||0 or more||If contains payload value is true|
|Adaptation Field Length||8||Number of bytes in the adaptation field immediately following this byte|
|Discontinuity indicator||1||Set to 1 if current TS packet is in a discontinuity state with respect to either the continuity counter or the program clock reference|
|Random Access indicator||1||Set to 1 if the PES packet in this TS packet starts a video/audio sequence|
|Elementary stream priority indicator||1||1 = higher priority|
|PCR flag||1||1 means adaptation field does contain a PCR field|
|OPCR flag||1||1 means adaptation field does contain an OPCR field|
|Splicing point flag||1||1 means presence of splice countdown field in adaptation field|
|Transport private data flag||1||1 means presence of private data bytes in adaptation field|
|Adaptation field extension flag||1||1 means presence of adaptation field extension|
|Below fields are optional||variable||Depends on flags|
|PCR||33+6+9||Program clock reference, stored in 6 octets in big-endian as 33 bits base, 6 bits padding, 9 bits extension.|
|OPCR||33+6+9||Original Program clock reference. Helps when one TS is copied into another|
|Splice countdown||8||Indicates how many TS packets from this one a splicing point occurs (may be negative)|
Each table or elementary stream in a transport stream is identified by a 13-bit packet identifier (PID). A demultiplexer extracts elementary streams from the transport stream in part by looking for packets identified by the same PID. In most applications, time-division multiplexing will be used to decide how often a particular PID appears in the transport stream.
|0||0x0000||Program Association Table (PAT) contains a directory listing of
all Program Map Tables
|1||0x0001||Conditional Access Table (CAT) contains a directory listing of
all ITU-T Rec. H.222 entitlement management message streams
used by Program Map Tables
|2||0x0002||Transport Stream Description Table contains descriptors
relating to the overall transport stream
|3||0x0003||IPMP Control Information Table contains a directory listing of
all ISO/IEC 14496-13 control streams
used by Program Map Tables
|4-15||0x0004-0x000F||Reserved for future use|
|16-31||0x0010-0x001F||Used by DVB metadata|
|32-8186||0x0020-0x1FFA||May be assigned as needed to Program Map Tables,
elementary streams and other data tables
|8187||0x1FFB||Used by DigiCipher 2/ATSC MGT metadata|
|8188-8190||0x1FFC-0x1FFE||May be assigned as needed to Program Map Tables,
elementary streams and other data tables
|8191||0x1FFF||Null Packet (used for fixed bandwidth padding)|
Transport stream has a concept of programs. Each single program is described by a Program Map Table (PMT) which has a unique PID, and the elementary streams associated with that program have PIDs listed in the PMT. For instance, a transport stream used in digital television might contain three programs, to represent three television channels. Suppose each channel consists of one video stream, one or two audio streams, and any necessary metadata. A receiver wishing to decode a particular "channel" merely has to decode the payloads of each PID associated with its program. It can discard the contents of all other PIDs. A transport stream with more than one program is referred to as MPTS - Multi Program Transport Stream. A single program transport stream is referred to as SPTS - Single Program Transport Stream.
There are 4 PSI tables: Program Association (PAT), Program Map (PMT), Conditional Access (CAT), and Network Information (NIT). The MPEG-2 specification does not specify the format of the CAT and NIT.
PAT stands for Program Association Table. It lists all programs available in the transport stream. Each of the listed programs is identified by a 16-bit value called program_number. Each of the programs listed in PAT has an associated value of PID for its Program Map Table (PMT).
The value 0x0000 of program_number is reserved to specify the PID where to look for Network Information Table (NIT). If such a program is not present in PAT the default PID value (0x0010) shall be used for NIT.
TS Packets containing PAT information always have PID 0x0000.
Program Map Tables (PMTs) contain information about programs. For each program, there is one PMT. While the MPEG-2 standard permits more than one PMT section to be transmitted on a single PID, most MPEG-2 "users" such as ATSC and SCTE require each PMT to be transmitted on a separate PID that is not used for any other packets. The PMTs provide information on each program present in the transport stream, including the program_number, and list the elementary streams that comprise the described MPEG-2 program. There are also locations for optional descriptors that describe the entire MPEG-2 program, as well as an optional descriptor for each elementary stream. Each elementary stream is labeled with a stream_type value.
To enable a decoder to present synchronized content, such as audio tracks matching the associated video, at least once each 100 ms a Program Clock Reference, or PCR is transmitted in the adaptation field of an MPEG-2 transport stream packet. The PID with the PCR for an MPEG-2 program is identified by the pcr_pid value in the associated Program Map Table. The value of the PCR, when properly used, is employed to generate a system_timing_clock in the decoder. The STC or System Time Clock decoder, when properly implemented, provides a highly accurate time base that is used to synchronize audio and video elementary streams. Timing in MPEG2 references this clock. For example, the presentation time stamp (PTS) is intended to be relative to the PCR. The first 33 bits are based on a 90 kHz clock. The last 9 are based on a 27 MHz clock. The maximum jitter permitted for the PCR is +/- 500 ns.
Some transmission schemes, such as those in ATSC and DVB, impose strict constant bitrate requirements on the transport stream. In order to ensure that the stream maintains a constant bitrate, a Multiplexer may need to insert some additional packets. The PID 0x1FFF is reserved for this purpose. The payload of null packets may not contain any data at all, and the receiver is expected to ignore its contents.
Transport Stream had been originally designed for broadcast. Later it was adapted for usage with digital video cameras, recorders and players by adding a 4-byte timecode (TC) to standard 188-byte packets, which resulted in a 192-byte packet.1213 This is what is informally called M2TS stream. Blu-ray Disc Association calls it "BDAV MPEG-2 transport stream".12 JVC called it TOD (possibly an abbreviation for "Transport stream on disc") when used in HDD-based camcorders like GZ-HD7.1415 The timecode allows quick access to any part of the stream either from a media player, or from a non-linear video editing system.16 It is also used to synchronize video streams from several cameras in a multi-camera shoot.
Filename extension .m2ts is used on Blu-ray Disc Video for files which contain an incompatible BDAV MPEG-2 transport stream due to the four additional octets added to every packet.1217 Blu-ray Disc Video titles authored with menu support are in the BDMV (Blu-ray Disc Movie) format and contain audio, video, and other streams in a BDAV container, which is based on the MPEG-2 transport stream format.1819 There is also the BDAV (Blu-ray Disc Audio/Visual) format, the consumer oriented alternative to the BDMV format used for movie releases. The BDAV format is used on BD-REs and BD-Rs for audio/video recording.19 Blu-ray Disc employs the MPEG-2 transport stream recording method. That enables transport streams of a BDAV converted digital broadcast to be recorded as they are with minimal alteration of the packets.13 It also enables simple stream cut style editing of a BDAV converted digital broadcast that is recorded as is and where the data can be edited just by discarding unwanted packets from the stream. Although it is quite natural, a function for high-speed and easy-to-use retrieval is built in.1320 Blu-ray Disc Video uses these modified MPEG-2 transport streams, compared to DVD's program streams that don't have the extra transport overhead.
- List of programs that open TS files
- Real-time Transport Protocol (RTP)
- Unidirectional Lightweight Encapsulation (ULE)
- "RFC 3555 - MIME Type Registration of RTP Payload Formats". July 2003. Retrieved 20 March 2010.
- ITU-T (July 1995). "Recommendation H.222.0 (07/95) - Superseded". Retrieved 18 July 2010.
- ITU-T (May 2006). "H.222.0 Summary". Archived from the original on 2011-08-24.
- ITU-T. "H.222.0 : Information technology - Generic coding of moving pictures and associated audio information: Systems". Retrieved 3 June 2010.
- ISO (1996). "ISO/IEC 13818-1:1996 - Information technology – Generic coding of moving pictures and associated audio information: Systems". Retrieved 18 July 2010.
- "MPEG-2 Transport Stream". AfterDawn.com. Retrieved 8 June 2010.
- "ATSC transmission". Broadcastengineering.com. 2005-06-20. Retrieved 2012-05-17.
- "MPEG Systems FAQ". Mpeg.chiariglione.org. Retrieved 2012-05-17.
- "ATSC MPEG Transport Stream Monitor". Tek.com. Retrieved 2012-05-17.
- "TSReader". Coolstf.com. 2008-04-07. Retrieved 2012-05-17.
- Support for use of the DVB Scrambling Algorithm version 3 within digital broadcasting systems Page 6
- Blu-ray Disc Association (March 2005) BD ROM - Audio Visual Application Format Specifications (PDF) Page 15, Retrieved on 2009-07-26
- Blu-ray Disc Association (March 2008) BD-RE - Audiovisual Application Format Specification for BD-RE 2.1 (PDF), Technical White Papers - BD RE, Retrieved on 2009-07-28
- "Steve Mullen, M2TS primer".
- Working with JVC Everio MOD & TOD files, Retrieved on 2009-07-27
- "How MPEG-TS works, videohelp.com". Forum.videohelp.com. Retrieved 2012-05-17.self-published source?
- Videohelp.com What is Blu-ray Disc and HD DVD?, Retrieved on 2009-07-26
- AfterDawn.com Glossary - BD-MV (Blu-ray Movie) and BDAV container, Retrieved on 2009-07-26
- AfterDawn.com Glossary - BDAV container, Retrieved on 2009-07-26
- Blu-ray Disc Association (August 2004) Blu-ray Disc Format, White paper (PDF) Page 22, Retrieved on 2009-07-28
- MPEG-2 Systems FAQ
- MPEG-4 Systems FAQ
- MPEG-1 description
- DVB Overview: Introduction to MPEG-2 Compression and Transport Stream (PowerPoint Presentation)
- MPEG-2.PPT (PowerPoint Presentation)
- MPEG-2 Transport Stream
- An example of live DVB-T transport stream analysis
- Generate a valid DVB-T/2 compatible transport stream with ffmpeg (Spanish)