# Mercalli intensity scale

The Mercalli intensity scale is a seismic scale used for measuring the intensity of an earthquake. It measures the effects of an earthquake, and is distinct from the moment magnitude $M_w$ usually reported for an earthquake (sometimes described as the Richter magnitude), which is a measure of the energy released. The intensity of an earthquake is not totally determined by its magnitude.

The scale quantifies the effects of an earthquake on the Earth's surface, humans, objects of nature, and man-made structures on a scale from I (not felt) to XII (total destruction).12 Values depend upon the distance to the earthquake, with the highest intensities being around the epicentral area. Data gathered from people who have experienced the quake are used to determine an intensity value for their location. The Mercalli (Intensity) scale originated with the widely-used simple ten-degree Rossi-Forel scale which was revised by Italian vulcanologist, Giuseppe Mercalli in 1884 and 1906.

In 1902 the ten-degree Mercalli scale was expanded to twelve degrees by Italian physicist Adolfo Cancani. It was later completely re-written by the German geophysicist August Heinrich Sieberg and became known as the Mercalli-Cancani-Sieberg (MCS) scale.

The Mercalli-Cancani-Sieberg scale was later modified and published in English by Harry O. Wood and Frank Neumann in 1931 as the Mercalli-Wood-Neumann (MWN) scale. It was later improved by Charles Richter, the father of the Richter magnitude scale.

The scale is known today as the Modified Mercalli scale (MM) or Modified Mercalli Intensity scale (MMI).

## Modified Mercalli Intensity scale

The lower degrees of the Modified Mercalli Intensity scale generally deal with the manner in which the earthquake is felt by people. The higher numbers of the scale are based on observed structural damage.

The small table is a rough guide to the degrees of the Modified Mercalli Intensity scale.12 The colors and descriptive names shown here differ from those used on certain shake maps in other articles.

The large table gives Modified Mercalli scale intensities that are typically observed at locations near the epicenter of the earthquake.1

The correlation between magnitude and intensity is far from total, depending upon several factors including the depth of the earthquake, terrain, population density, and damage. For example, on May 19, 2011 an earthquake of magnitude 0.7 in Central California, United States 4 km deep was classified as of intensity III by the United States Geological Survey (USGS) over 100 miles (160 km) away from the epicenter (and II intensity almost 300 miles (480 km) from the epicenter), while a 4.5 magnitude quake in Salta, Argentina 164 km deep was of intensity I.3

Magnitude Typical Maximum Modified Mercalli Intensity I I – II II – IV IV – VI VI – VIII VII – VIII VIII or higher X or higher

I. Instrumental Generally not felt by people unless in favorable conditions. Felt only by a couple people that are sensitive, especially on the upper floors of buildings. Delicately suspended objects (including chandeliers) may swing slightly. Felt quite noticeably by people indoors, especially on the upper floors of buildings. Many do not recognize it as an earthquake. Standing automobiles may rock slightly. Vibration similar to the passing of a truck. Duration can be estimated. Indoor objects (including chandeliers) may shake. Felt indoors by many to all people, and outdoors by few people. Some awakened. Dishes, windows, and doors disturbed, and walls make cracking sounds. Chandeliers and indoor objects shake noticeably. The sensation is more like a heavy truck striking building. Standing automobiles rock noticeably. Dishes and windows rattle alarmingly. Damage none. Felt inside by most or all, and outside. Dishes and windows may break and bells will ring. Vibrations are more like a large train passing close to a house. Possible slight damage to buildings. Liquids may spill out of glasses or open containers. None to a few people are frightened and run outdoors. Felt by everyone, outside or inside; many frightened and run outdoors, walk unsteadily. Windows, dishes, glassware broken; books fall off shelves; some heavy furniture moved or overturned; a few instances of fallen plaster. Damage slight to moderate to poorly designed buildings, all others receive none to slight damage. Difficult to stand. Furniture broken. Damage light in building of good design and construction; slight to moderate in ordinarily built structures; considerable damage in poorly built or badly designed structures; some chimneys broken or heavily damaged. Noticed by people driving automobiles. Damage slight in structures of good design, considerable in normal buildings with a possible partial collapse. Damage great in poorly built structures. Brick buildings easily receive moderate to extremely heavy damage. Possible fall of chimneys, factory stacks, columns, monuments, walls, etc. Heavy furniture moved. General panic. Damage slight to moderate (possibly heavy) in well-designed structures. Well-designed structures thrown out of plumb. Damage moderate to great in substantial buildings, with a possible partial collapse. Some buildings may be shifted off foundations. Walls can fall down or collapse. Many well-built structures destroyed, collapsed, or moderately to severely damaged. Most other structures destroyed, possibly shifted off foundation. Large landslides. Few, if any structures remain standing. Numerous landslides, cracks and deformation of the ground. Total destruction – everything is destroyed. Lines of sight and level distorted. Objects thrown into the air. The ground moves in waves or ripples. Large amounts of rock move position. Landscape altered, or leveled by several meters. Even the routes of rivers can be changed.

### Correlation with physical quantities

The Mercalli scale is not defined in terms of more rigorous, objectively quantifiable measurements such as shake amplitude, shake frequency, peak velocity, or peak acceleration. Human perceived shakings and building damages are best correlated with peak acceleration for lower-intensity events, and with peak velocity for higher-intensity events.4

### Comparison to the moment magnitude scale

The effects of any one earthquake can vary greatly from place to place, so there may be many Mercalli intensity values measured for the same earthquake. These values can be best displayed using a contoured map. Each earthquake, on the other hand, has only one magnitude.

## Historical analysis

Earthquake Death Toll Moment Magnitude Mercalli intensity
1920 Haiyuan earthquake 235,502 7.85–8.56 XII
1976 Tangshan earthquake 242,769-650,0007 7.8–8.2 XI8
2008 Sichuan earthquake 69,195 7.99 XI
1556 Shaanxi earthquake 830,000 7.9–8.0 XI
1960 Valdivia earthquake 2,230–6,000 9.5 XI10
1908 Messina earthquake 150,000–200,000 7.2 XI
1964 Good Friday/Anchorage/Alaska earthquake 143. Totals include tsunami. 9.2 XI
1995 Kobe/Great Hanshin earthquake 6,434 6.8–7.3 X–XI8
1906 San Francisco earthquake 3,425 7.8 X
1755 Boston/Massachusetts/New England earthquake 0 5.9–6.3 VIII
1977 Vrancea earthquake 1,578 7.2 X–XI
2010 Canterbury earthquake 0 7.1 X
2010 Haiti earthquake 316,000 7.0 X
1980 Irpinia earthquake 2,914 6.5 X
2011 Van earthquake 432 7.2 X
2004 Indian Ocean earthquake and tsunami 230,000–280,000. Totals included tsunami. 9.1–9.3 IX11
2011 Japan earthquake and tsunami 18,500. Totals include tsunami. 9.0 IX12
1994 Northridge/Los Angeles earthquake 60 6.7 IX
2011 Christchurch earthquake 182 6.3 IX13