British Motor Corporation (1959–1968)
British Leyland (1968–1986)
Rover Group (1986–2000)
BMC South Africa
|Also called||Austin 850 1
Austin Partner 2
Morris Mascot 2
Wolseley 1000 2
Cowley plant, Oxford (1959-1968)
Longbridge plant, Birmingham (1959-2000)
|Designer||Sir Alec Issigonis|
|Body and chassis|
|Body style||2-door saloon
|Engine||848 cc, 970 cc, 997 cc, 998 cc, 1,071 cc, 1,098 cc, 1,275 cc I4 (A-series)|
5-speed manual (optional extra on some later models)
|Wheelbase||2,036 mm (80.2 in) (saloon)
2,138 mm (84.2 in) (estate and commercials)
|Length||3,054 mm (120.2 in) (saloon)3
3,299 mm (129.9 in) (estate and commercials)
3,300 mm (130 in) (Wolseley Hornet/Riley Elf)4
|Width||1,397 mm (55.0 in)|
|Height||1,346 mm (53.0 in)|
|Kerb weight||617–686 kg (1,360–1,512 lb)|
The Mini is a small economy car made by the British Motor Corporation (BMC) and its successors from 1959 until 2000. The original is considered a British icon of the 1960s.567 Its space-saving front-wheel drive layout – allowing 80 per cent of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers.8 The vehicle is in some ways considered the British equivalent of its German contemporary the Volkswagen Beetle, which enjoyed similar popularity in North America. In 1999 the Mini was voted the second most influential car of the 20th century, behind the Ford Model T.910
This distinctive two-door car was designed for BMC by Sir Alec Issigonis.1112 It was manufactured at the Longbridge and Cowley plants in England, the Victoria Park / Zetland British Motor Corporation (Australia) factory in Sydney, Australia, and later also in Spain (Authi), Belgium, Chile, Italy (Innocenti), Malta, Portugal, South Africa, Uruguay, Venezuela and Yugoslavia. The Mini Mark I had three major UK updates – the Mark II, the Clubman and the Mark III. Within these was a series of variations, including an estate car, a pick-up truck, a van and the Mini Moke – a jeep-like buggy. The Mini Cooper and Cooper "S" were sportier versions that were successful as rally cars, winning the Monte Carlo Rally four times from 1964 through to 1967, although in 1966 the Mini was disqualified after the finish, along with six other British entrants, which included the first four cars to finish, under a questionable ruling that the cars had used an illegal combination of headlamps and spotlights.13
On introduction in August 1959 the Mini was marketed under the Austin and Morris names, as the Austin Seven and Morris Mini-Minor.14 The Austin Seven was renamed to Austin Mini in January 1962 14 and Mini became a marque in its own right in 1969.1516 In 1980 it once again became the Austin Mini and in 1988 the Rover Mini.17
- 1 Design and development
- 2 Mark I Mini: 1959–1967
- 3 Mark II Mini: 1967–1970
- 4 Variants
- 5 Mini Cooper and Cooper S: 1961–2000
- 6 Mini Clubman and 1275GT: 1969–1980
- 7 Mark III and onwards: 1969–2000
- 8 End of production
- 9 Timeline
- 10 Limited editions
- 11 Concepts and unproduced prototypes
- 12 Kit cars and customisation
- 13 Awards
- 14 Sales
- 15 Safety record
- 16 50th anniversary
- 17 Mini's name today
- 18 See also
- 19 References
- 20 External links
Designated by Leonard Lord as project ADO15 (Amalgamated Drawing Office project number 15) and the product of the Morris design team, the Mini came about because of a fuel shortage caused by the 1956 Suez Crisis.18 Petrol was once again rationed in the UK, sales of large cars slumped, and the market for German bubble cars boomed. Lord, the somewhat autocratic head of BMC, reportedly detested these cars so much that he vowed to rid the streets of them and design a 'proper miniature car'.19 He laid down some basic design requirements: the car should be contained within a box that measured 10×4×4 feet (3.0×1.2×1.2 m); and the passenger accommodation should occupy 6 feet (1.8 m) of the 10-foot (3.0 m) length; and the engine, for reasons of cost, should be an existing unit. Issigonis, who had been working for Alvis, had been recruited back to BMC in 1955 and, with his skills in designing small cars, was a natural for the task. The team that designed the Mini was remarkably small: as well as Issigonis, there was Jack Daniels (who had worked with him on the Morris Minor), Chris Kingham (who had been with him at Alvis), two engineering students and four draughtsmen. Together, by October 1957, they had designed and built the original prototype, which was affectionately named "The Orange Box" because of its colour.5
The ADO15 used a conventional BMC A-Series four-cylinder, water-cooled engine,20 but departed from tradition by mounting it transversely, with the engine-oil-lubricated, four-speed transmission in the sump, and by employing front-wheel drive. Almost all small front-wheel-drive cars developed since have used a similar configuration, except with the transmission usually separately enclosed rather than using the engine oil. The radiator was mounted at the left side of the car so that the engine-mounted fan could be retained, but with reversed pitch so that it blew air into the natural low pressure area under the front wing. This location saved vehicle length, but had the disadvantage of feeding the radiator with air that had been heated by passing over the engine. It also exposed the entire ignition system to the direct ingress of rainwater through the grille.
The suspension system, designed by Issigonis's friend Dr. Alex Moulton at Moulton Developments Limited, used compact rubber cones instead of conventional springs. This space-saving design also featured rising progressive-rate springing of the cones, and provided some natural damping, in addition to the normal dampers. Built into the subframes, the rubber cone system gave a raw and bumpy ride accentuated by the woven-webbing seats, but the rigidity of the rubber cones, together with the wheels' positioning at the corners of the car, gave the Mini go kart-like handling.
Initially an interconnected fluid system was planned, similar to the one that Alec Issigonis and Alex Moulton were working on in the mid-1950s at Alvis. They had assessed the mechanically interconnected Citroën 2CV suspension at that time (according to an interview by Moulton with Car Magazine in the late 1990s),citation needed which inspired the design of the Hydrolastic suspension system for the Mini and Morris/Austin 1100, to try to keep the benefits of the 2CV system (ride comfort, body levelling, keeping the roadwheel under good control and the tyre in contact with the road), but with added roll stiffness that the 2CV lacked. The short development time of the car meant this was not ready in time for the Mini's launch. The system intended for the Mini was further developed and the hydrolastic system was first used on the Morris 1100, launched in 1962; the Mini gained the system later in 1964. Ten-inch (254 mm) wheels were specified, so new tyres had to be developed, the initial contract going to Dunlop. Issigonis went to Dunlop stating that he wanted even smaller, 8 in (203 mm) wheels (even though he had already settled on ten-inch). An agreement was made on the ten-inch size, after Dunlop rejected the eight-inch (203 mm) proposition.
Sliding windows allowed storage pockets in the hollow doors; reportedly Issigonis sized them to fit a bottle of Gordon's Gin.11 The boot lid was hinged at the bottom so that the car could be driven with it open to increase luggage space. On early cars the number plate was hinged at the top so that it could swing down to remain visible when the boot lid was open. This feature was later discontinued after it was discovered that exhaust gases could leak into the cockpit when the boot was open.
The Mini was designed as a monocoque shell with welded seams visible on the outside of the car running down the A and C pillars, and between the body and the floor pan. Those that ran from the base of the A-pillar to the wheel well were described as 'everted' (lit., 'turned outward') to provide more room for the front seat occupantscitation needed. To further simplify construction, the hinges for the doors and boot lid were mounted externally.
Production models differed from the prototypes by the addition of front and rear subframes to the unibody to take the suspension loads, and by having the engine mounted the other way round, with the carburettor at the back rather than at the front. This layout required an extra gear between engine and transmission to reverse the direction of rotation at the input to the transmission. Having the carburettor behind the engine reduced carburettor icing, but the distributor was then exposed to water coming in through the grille. The engine size was reduced from 948 to 848 cc (57.9 to 51.7 cu in); this, in conjunction with a small increase in the car's width, cut the top speed from 90 mph (140 km/h) to 72 mph (116 km/h).
|Mini “Mark I”|
1959 Morris Mini Minor
|Also called||Austin 850
|Production||1959 - 1967|
|Designer||Sir Alec Issigonis|
|Body and chassis|
|Body style||2-door saloon
|Engine||850 cc (0.9 l) I4
997 cc (1.0 l) I4
998 cc (1.0 l) I4
1,071 cc (1.1 l) I4
1,275 cc (1.3 l) I4
The production version of the Mini was demonstrated to the press in April 1959, and by August several thousand cars had been produced ready for the first sales.22 The Mini was officially announced to the public on 26 August 1959. Some 2,000 cars had already been sent abroad and would be displayed that day in nearly 100 countries.23
The first example, a Morris Mini-Minor with the registration 621 AOK, is on display at the Heritage Motor Centre in Warwickshire.24 Another early example from 1959 is now on display at the National Motor Museum in Hampshire.25
The Mini was marketed under BMC's two main brand names, Austin and Morris until 1969, when it became a marque in its own right.15 The Morris version was known to all as "the Mini" or Mini-Minor. The word minor is Latin for "lesser"; so an abbreviation of the Latin word for "least" – minimus – was used for the new even smaller car. One name proposed for the Austin version was Austin Newmarket. Austin dealers sold their almost identical car as an Austin Seven (sometimes written as SE7EN in early publicity material – the '7' the letter V rotated left so it approximated the number 7), which recalled the popular small Austin 7 of the 1920s and 1930s. "Morris Mini-Minor" seems to have been a play on words; the Morris Minor was a larger, well known and successful car that continued in production.
Until 1962, the cars appeared as the Austin 850 and Morris 850 in North America and France, and in Denmark as the Austin Partner (until 1964) and Morris Mascot (until 1981). The Morris name Mini (Mini-Minor) was first used for Austin's version by BMC in 1961 when the Austin Seven was rebranded as the Austin Mini,26 somewhat to the surprise of the Sharp's Commercials car company (later known as Bond Cars), who had been using the name Minicar for their three-wheeled vehicles since 1949. However, legal action was somehow averted,27 and BMC used the name "Mini" thereafter.28
In 1964, the suspension of the cars was replaced by another Moulton design, the hydrolastic system. The new suspension gave a softer ride, but it also increased weight and production cost. In 1971, the original rubber suspension reappeared and was retained for the remaining life of the Mini.
Slow at the outset, Mark I sales strengthened across most of the model lines in the 1960s, and production totalled 1,190,000.29 Ford purchased a Mini and dismantled it to see if they could offer an alternative. Ford determined that the BMC must have been losing around £30 per car, and so decided to produce a larger car – the Cortina, launched in 1962 – as its competitor in the budget market. BMC insisted that the way company overheads were shared out, the Mini always made money.30 Larger profits came from the popular De Luxe models and from optional extras such as seat belts, door mirrors, a heater and a radio, which would be considered necessities on modern cars, as well as the various Cooper and Cooper S models.
The Mini entered into popular culture in the 1960s with well-publicised purchases by film and music stars.31
|Also called||Morris Mini
|Assembly||Longbridge, Birmingham, England,
Cowley, Oxfordshire, England
Cape Town, South Africa
Petone, New Zealand,
Novo Mesto, Yugoslavia
|Body and chassis|
|Engine||1,275 cc (1.3 l) I4
998 cc (1.0 l) I4
850 cc (0.9 l) I4
The popularity of the original Mini spawned many models that targeted different markets.
Built as more luxurious versions of the Mini, both the Wolseley Hornet and the Riley Elf had longer, slightly finned rear wings and larger boots that gave the cars a more traditional three-box design. Wheelbase of the Elf and Hornet remained at 2.036 m (6.68 ft), whereas the overall length was increased to 3.27 m (10.7 ft). This resulted in a dry weight of 638 kg (1,407 lb)/642.3 kg (1,416 lb) (rubber/hydrolastic suspension) for the Elf and 618 kg (1,362 lb)/636.4 kg (1,403 lb) for the Hornet respectively.34 Front-end treatment, which incorporated each marque's traditional upright grille design (the Hornet's grille with a lit "Wolseley" badge), also contributed to a less utilitarian appearance. The cars had larger-diameter chrome hubcaps than the Austin and Morris Minis, and additional chrome accents, bumper overriders and wood-veneer dashboards. The Riley was the more expensive of the two cars.35 The name "Wolseley Hornet" was first used on a 1930s sports car, while the name "Elf" recalled the Riley Sprite and Imp sports cars, also of the 1930s. The full-width dashboard was a differentiator between the Elf and Hornet. This dashboard was the idea of Christopher Milner the Sales Manager for Riley. Both the Riley Elf's and Wolseley Hornet's bodies were built at Fisher & Ludlow under their "Fisholow" brandname. Plates in the engine compartment on the right side fitch plate bear evidence of this speciality. Very early Mark I versions of both cars (e.g. press photo of 445MWL) had no overriders on the bumpers and a single piece front wing (A-panel and wing in one piece, no outside seam below scuttle panel) that was soon given up again, allegedly due to cost. The Elf's and Hornet's special bumper overriders first appeared in 1962. Early production Mark Is also had a combination of leather and cloth seats (Elf R-A2S1-101 to FR2333, Hornet W-A2S1-101 to FW2105) whereas all later models had full leather seats.36 Mark I models were equipped with single leading shoe brakes on the front.
Both the Elf and the Hornet went through three versions. Initially, they used the 848 cc (51.7 cu in) 34 bhp (25 kW) engine (engine type 8WR)34 with a single HS2 carburettor, changing to a single HS2 carburettor 38 bhp (28 kW) version of the Cooper's 998 cc (60.9 cu in) power unit (engine type 9WR)34 in the Mark II in 1963. This increased the car's top speed from 71 to 77 mph (114 to 124 km/h) . Therefore, Mark II cars also came with increased braking power in the form of front drum brakes with twin leading shoes to cope with the increased power output. Both Mark I and Mark II featured four-speed, gearboxes (three synchromesh gears) with rod gear change, a.k.a. "magic wand" type. Automatic gearboxes became available on the Mark II in 1965 as an option. The Mark III facelift of 1966 brought not only wind-up windows and fresh-air facia vents, but disc brakes replaced front drum brakes, too. Concealed door hinges were introduced two years before these were seen on the mainstream Mini. The gear selecting mechanism was updated to the rod type, as seen on all later Mini type cars. Automatic gearboxes were available to the Mark III in 1967 again. Full-four synchromesh gearing was eventually introduced during 1968. 30,912 Riley Elfs and 28,455 Wolseley Hornets were built.29 Production ceased in late 1969 when British Leyland discontinued the Riley and Wolseley brand names.
Vehicle Identification – Serial Number Prefix Letter Code:
- First prefix letter – name: R-Riley, W-Wolseley
- Second prefix letter – engine type: A
- Third prefix letter – body type: 2S – 2-door Saloon
- Fourth prefix – series of model: 1 – 1st series, 2 – 2nd series, 3 – 3rd series
- Fifth prefix (used to denote cars different to standard right hand drive): L – left hand drive
Code example: R-A2S1-154321 (Riley, A type engine, 2 door saloon, 1st series, serial number "154321")36
Two-door estate cars with double "barn"-style rear doors. Both were built on a slightly longer chassis of 84 inch (2.14 m) compared to 80.25 inch (2.04 m) for the saloon.
The luxury models had decorative, non-structural wood inserts in the rear body which gave the car a similar appearance to the larger Morris Minor Traveller which had some of the look of an American-style 1950s Woodie. Approximately 108,000 Austin Mini Countrymen and 99,000 Morris Mini Travellers were built.29
A commercial panel van (in US English, a sedan delivery) rated at ¼-ton load capacity. Built on the longer Traveller chassis but without side windows, it proved popular in 1960s Britain as a cheaper alternative to the car: it was classed as a commercial vehicle and as such carried no sales tax. A set of simple stamped steel slots served in place of a more costly chrome grille. The Mini Van was renamed as the Mini 95 in 1978, the number representing the gross vehicle weight of 0.95 tons. 521,494 were built.29
A utility vehicle intended for the British Army was built with a twin-engined 4-wheel-drive. Although the 4WD Moke could climb a 1:2 gradient, it lacked enough ground clearance for military use.37 The single-engined front-wheel-drive Moke enjoyed some popularity in civilian production. About 50,000 were made in total,29 from 1964 to 1968 in the UK, 1966 to 1982 in Australia and 1983 to 1989 in Portugal.38 The Moke was marketed in holiday locations such as Barbados and Macau, where they were also used as police cars. "Moke" is archaic British slang for a donkey.
A pick-up truck (technically a coupé utility by definition), 11 ft (3.4 m) in total length was built on the longer Mini Van platform, with an open-top rear cargo area and a tailgate. The factory specified the weight of the Pick-up as less than 1,500 lb (680 kg) with a full 6 imperial gallons (27 l; 7.2 US gal) tank of fuel.
As with the Van, the Pick-up had stamped metal slots for airflow into the engine compartment. The Pickup was basic, although the factory brochure described a "fully equipped Mini Pick-up is also available which includes a recirculatory heater." Passenger-side sun visor, seat belts, laminated windscreen, tilt tubes and cover were also available at extra cost.39 Like the van, the Pick-up was renamed as the Mini 95 in 1978.
A total of 58,179 Mini Pick-up models were built.29
Built in the Australian British Motor Corporation factory at Zetland, New South Wales, using 80% local content, the Morris Mini K was advertised as the "great leap forward".40 The Mini K ('K' standing for Kangaroo) had a 1098 cc engine and was the last round-nose model to be produced in Australia, originally priced at A$1780. The Mini K was offered in 2-door sedan 41 and 2-door van body styles.42
Issigonis' friend John Cooper, owner of the Cooper Car Company and designer and builder of Formula One and rally cars, saw the potential of the Mini for competition. Issigonis was initially reluctant to see the Mini in the role of a performance car, but after John Cooper appealed to BMC management, the two men collaborated to create the Mini Cooper. The Austin Mini Cooper and Morris Mini Cooper debuted in 1961.1143
The 848 cc (51.7 cu in) engine from the Morris Mini-Minor was given a longer stroke to increase capacity to 997 cubic centimetres (60.8 cu in) increasing power from 34 to 55 bhp (25 to 41 kW).20 The car featured a racing-tuned engine, twin SU carburettors, a closer-ratio gearbox and front disc brakes, uncommon at the time in a small car. One thousand units of this version were commissioned by management, intended for and designed to meet the homologation rules of Group 2 rally racing. The 997 cc engine was replaced by a shorter stroke 998 cc unit in 1964. In 1962, Rhodesian John Love became the first non-British racing driver to win the British Saloon Car Championship driving a Mini Cooper.
A more powerful Mini Cooper, dubbed the "S", was developed in tandem and released in 1963. Featuring a 1071 cc engine with a 70.61 mm bore and nitrided steel crankshaft and strengthened bottom end to allow further tuning; and larger servo-assisted disc brakes, 4,030 Cooper S cars were produced and sold until the model was updated in August 1964. Cooper also produced two S models specifically for circuit racing in the under 1,000 cc and under 1,300 cc classes respectively, rated at 970 cc (59 cu in) and a 1,275 cc (77.8 cu in), both had a 70.61 mm (2.780 in) bore and both of which were also offered to the public. The smaller-engine model was not well received, and only 963 had been built when the model was discontinued in 1965. The 1,275 cc Cooper S models continued in production until 1971.
Sales of the Mini Cooper were as follows: 64,000 Mark I Coopers with 997 cc or 998 cc engines; 19,000 Mark I Cooper S with 970 cc, 1,071 cc or 1,275 cc engines; 16,000 Mark II Coopers with 998 cc engines; 6,300 Mark II Cooper S with 1,275 cc engines. There were no Mark III Coopers and just 1,570 Mark III Cooper S.
The Mini Cooper S won the Monte Carlo Rally in 1964, 1965 and 1967.44 Minis were initially placed first, second and third in the 1966 rally as well, but were disqualified after a controversial decision by the French judges. The disqualification related to the use of a variable resistance headlamp dimming circuit in place of a dual-filament lamp.45 It should be noted that the Citroën DS that was eventually awarded first place had illegal white headlamps but escaped disqualification.46 The driver of the Citroën, Pauli Toivonen, was reluctant to accept the trophy and vowed that he would never race for Citroën again.47 BMC probably received more publicity from the disqualification than they would have gained from a victory.48
|1962||Pat Moss||Ann Wisdom||Ladies' Award|
|1963||Rauno Aaltonen||Tony Ambrose||3rd|
|1964||Paddy Hopkirk||Henry Liddon||Winner|
|Timo Mäkinen||Patrick Vanson||4th|
|1965||Timo Mäkinen||Paul Easter||Winner|
|1966||Timo Mäkinen||Paul Easter||(disqualified)|
|Rauno Aaltonen||Tony Ambrose||(disqualified)|
|Paddy Hopkirk||Henry Liddon||(disqualified)|
|1967||Rauno Aaltonen||Henry Liddon||Winner|
|1968||Rauno Aaltonen||Henry Liddon||3rd|
|Tony Fall||Mike Wood||4th|
|Paddy Hopkirk||Ron Crellin||5th|
In 1971, the Mini Cooper design was licensed in Italy by Innocenti and in 1973 to Spain by Authi (Automoviles de Turismo Hispano-Ingleses), which began to produce the Innocenti Mini Cooper 1300 and the Authi Mini Cooper 1300, respectively. The Cooper name was discontinued from the UK Mini range at this time.
A new Mini Cooper named the RSP (Rover Special Products) was briefly relaunched in 1990–1991, with slightly lower performance than the 1960s Cooper. It proved popular and a new Cooper-marked Mini went into full production in late 1991. From 1992, Coopers were fitted with a fuel-injected version of the 1,275 cc engine, and in 1997 a multi-point fuel injected engine was introduced, along with a front-mounted radiator and various safety improvements.49
|Assembly||Longbridge, Birmingham, England
Setúbal, Portugal, Petone, New Zealand
|Body and chassis|
|Body style||2-door saloon|
|Engine||1,098 cc (1.1 l) I4
998 cc (1.0 l) I4
In 1969, under the ownership of British Leyland, the Mini was given a facelift by stylist Roy Haynes, who had previously worked for Ford. The restyled version was called the Mini Clubman, and has a squarer frontal look, using the same indicator/sidelight assembly as the Austin Maxi. The Mini Clubman was intended to replace the upmarket Riley and Wolseley versions. A new model, dubbed the 1275GT, was slated as the replacement for the 998 cc Mini Cooper (the 1,275 cc Mini Cooper S continued alongside the 1275GT for two years until 1971). The Clubman Estate replaced the Countryman and Traveller.
British Leyland continued to produce the classic 1959 "round-front" design, alongside the newer Clubman and 1275GT models (which were replaced in 1980 by the new hatchback Austin Metro, while production of the original "round-front" Mini design continued for another 20 years.)
Production of the Clubman and 1275GT got off to a slow start because the cars incorporated "lots of production changes" including the relocation of tooling from the manufacturer's Cowley plant to the Longbridge plant: very few cars were handed over to customers before the early months of 1970.50
Early domestic market Clubmans were still delivered on cross-ply tyres despite the fact that by 1970 radials had become the norm for the car's mainstream competitors.50 By 1973 new Minis were, by default, being shipped with radial tyres, though cross-plies could be specified by special order, giving British buyers a price saving of £8.51
The 1275GT is often incorrectly described as the "Mini Clubman 1275GT". The official name was always just the "Mini 1275GT", and it was a separate, distinct model from the Clubman (although it shared the same frontal treatment as the Mini Clubman, and was launched at the same time).
In 1971, the 1,275 cc Mini Cooper S was discontinued in the UK, leaving the Mini 1275GT as the only sporting Mini on sale for the rest of the decade. Innocenti in Italy, however, continued making their own version of the Mini Cooper for some time. While the UK built 1275GT was not nearly as quick as a 1275 Mini Cooper S, it was cheaper to buy, run, and insure. It was the first Mini to be equipped with a tachometer. It also featured a standard-fit close-ratio gearbox. Performance of the 1275GT was lively for the time, achieving 0–60 mph (97 km/h) in 12.9 seconds, and the excellent midrange torque offered a 30–50 mph (48–80 km/h) time in top gear of only nine seconds. The bluff front, however, meant that the model struggled to reach 90 mph (140 km/h).
Throughout the 1970s, British Leyland continued to produce the classic 1959 "round-front" design, alongside the newer Clubman and 1275GT models. The long-nose Clubman and 1275GT offered better crash safety, were better equipped, and had better under-bonnet access, but they were more expensive and aerodynamically inferior to the original 1959 design. The Mini Clubman and 1275GT were replaced in 1980 by the new hatchback Austin Metro, while production of the original "round-front" Mini design continued for another 20 years. At the end of Clubman and 1275GT production, 275,583 Clubman saloons, 197,606 Clubman Estates and 110,673 1275GTs had been made.29
For the Australian market, all Minis including the Van gained the Clubman front in 1971 although the car was still basically a Mk I behind the A-Pillar.52 The Australian van thus became the only Clubman Van produced anywhere in the world.52 From mid-1971 to the end of 1972, a Clubman GT version of the sedan was produced.53 This was essentially a Cooper S in Clubman body, equipped with the same 7.5-inch (190 mm) disc brakes, twin fuel tanks, and twin-carburettor Cooper S 1,275 cc engine. Australian Clubman sedans were marketed under the Morris Mini Clubman name when introduced in August 1971,54 and as the Leyland Mini, without the Clubman name, from February 1973.55
To end Mini production in Australia, a limited edition runout model was produced − the 1275LS. Fitted with a pollution control 1,275 cc engine sourced from Europe, the LS had a single 1.5-inch (38 mm) carburettor and 8.4-inch (210 mm) disc brakes. Production of this model commenced in July 1978 and concluded in October 1978 with an approximate total of 810 vehicles produced.
|Manufacturer||British Leyland Motor Corporation|
|Production||October 1969 - 1976|
|Assembly||Longbridge plant, England. Pamplona, Spain. Zetland, New South Wales, Seneffe, Belgium. Arica, Chile. Setúbal, Portugal. Cape Town, South Africa. Petone, New Zealand.|
|Body and chassis|
|Body style||2-door Saloon
|Layout||Front wheel drive|
|Engine||848 cc (0.8 l) I4
998 cc (1.0 l) I4
1,275 cc (1.3 l) I4
|Kerb weight||848cc = 610kg
1275cc = 645kg
The Mark III Mini had a modified bodyshell with enough alterations to see the factory code change from ADO15 to ADO20 (which it shared with the Clubman). The most obvious changes were larger doors with concealed hinges. Customer demand led to the sliding windows being replaced with winding windows—although some Australian-manufactured Mark I Minis had adopted this feature in 1965 (with opening quarterlight windows). The suspension reverted from Hydrolastic to rubber cones56 as a cost-saving measure.57 (The 1275 GT and Clubman would retain the hydrolastic system until June 1971 when they, too, switched to the rubber cone suspension of the original Minis.56)
Production at the Cowley plant was ended, and the simple name Mini completely replaced the separate Austin and Morris brands.58
In the late 1970s, Innocenti introduced the Innocenti 90 and 120, Bertone-designed hatchbacks based on the Mini platform. Bertone also created a Mini Cooper equivalent, christened the Innocenti De Tomaso, that sported a 1275 cc engine similar to the MG Metro engine, but with a 11-stud head, a special inlet manifold, and used the "A" clutch instead of the "Verto" type. It also used homokinetic shafts instead of rubber couplings.
The Mini was still popular in Britain, but increasingly outdated in the face of newer and more practical rivals. Since the late 1960s, plans had been in place for a newer and more practical supermini to replace it, though the Mini was still the only car of this size built by British Leyland for the home market.
Reports of the Mini's imminent demise surfaced again in 1980 with the launch of the Austin Mini-Metro (badging with the word mini in all lowercase). The Mini was beginning to fall out of favour in many export markets, with the South African, Australian, and New Zealand markets all stopping production around this time.
Longbridge plant, Birmingham, England
Zetland, New South Wales,
Cape Town, South Africa
Petone, New Zealand
|Body and chassis|
|Body style||2-door saloon
|Engine||998 cc (1.0 l) I4
1,100 cc (1.1 l) I4
1,275 cc (1.3 l) I4
Mini City E
|Assembly||Longbridge plant, Birmingham, England|
|Body and chassis|
|Body style||2-door saloon|
|Engine||998 cc (1.0 l) I4
1,275 cc (1.3 l) I4
|Assembly||Longbridge plant, Birmingham, England
|Body and chassis|
|Body style||2-door saloon|
|Engine||1,275 cc (1.3 l) I4|
|Assembly||Longbridge, Birmingham, England|
|Body and chassis|
|Body style||2-door saloon|
|Engine||1,275 cc (1.3 l) I4|
Although the Mini continued after the Metro's launch, production volumes were reduced as British Leyland and successor combine Rover Group concentrated on the Metro as its key supermini. 1981 was the Mini's last year in the top ten of Britain's top selling cars, as it came ninth and the Metro was fifth. In the summer of 1991, a fibreglass bodied Mini entered production in Venezuela. The producer, Facorca, intended to sell the car in the Caribbean and Central America, and also had plans for Brazilian assembly.60
- Mark III (introduced in November 1969) had wind up windows with internal door hinges, except for the van and pick-up models. The boot lid lost the original hinged number plate and its recess shape and a large rear colour-coded lamp was fitted in its place, along with larger rear side windows.
- Mark IV (introduced in 1976) had a front rubber mounted subframe with single tower bolts and the rear frame had some larger bushes introduced. Twin stalk indicators were introduced with larger foot pedals. From 1977 onwards, the rear indicator lamps had the reverse lights incorporated in them. In 1980, the engine was uprated to the improved A-Plus unit from the Metro.
- Mark V (from 1984): all cars had 8.4-inch (210 mm) brake discs and plastic wheel arches (mini special arches) but retained the same Mark IV body shell shape.
- Mark VI (from 1990): the engine mounting points were moved forward to take 1275 cc power units, and includes the later HIF (Horizontal Integral Float) version of the SU (Skinners Union) carb, plus the single point fuel injected car which came out in 1991. The 998 cc power units were discontinued. An internal bonnet release was fitted from 1992.
- Mark VII (from 1996): was the final version, twin point injection with front mounted radiator. Full-width dashboard replaces the original shelf, internal bonnet release. Introduction of airbag on driver's side.
Throughout the 1980s and 1990s the British market received numerous "special editions" of the Mini, which shifted the car from a mass-market item into a fashionable icon. It was this image that perhaps helped the Mini become such an asset for BMW, which later bought the remnants of BMC as the Rover Group. It was even more popular in Japan, which took the lion's share of the circa 40,000 Minis produced annually in the early 1990s.60 It was seen there as a retro-cool icon, and inspired many imitators. The ERA Mini Turbo was particularly popular with Japanese buyers.
By March 2000, Rover was still suffering massive losses, and BMW decided to dispose of most of the companies. The sell-off was completed in May that year. MG and Rover went to Phoenix, a new British consortium; and Land Rover was sold to Ford Motor Company. BMW retained the Mini name and the planned new model, granting Rover temporary rights to the brand and allowing it to manufacture and sell the run-out model of the old Mini. By April 2000, the range consisted of four versions: the Mini Classic Seven, the Mini Classic Cooper, the Mini Classic Cooper Sport and—for overseas European markets—the Mini Knightsbridge. The last Mini (a red Cooper Sport) was built on 4 October 2000 and presented to the British Motor Industry Heritage Trust in December of that year.5 A total of 5,387,862 cars had been manufactured.29
After the last of the Mini production had been sold, the 'Mini' name reverted to BMW ownership. The new BMW Mini is technically unrelated to the old car but retains the classic transverse four-cylinder, front-wheel-drive configuration and iconic "bulldog" stance of the original.
The last Mini to leave the Longbridge plant did so in 2012, when a 1970s 1275GT which was used by staff to travel around the car plant was recovered from the disused tunnels under the plant. The car was damaged by a storage container falling on it and had been left without an engine or gearbox for around 30 years before being recovered during work to infill the tunnels. This car was sold at auction in July 2013 for £1400.61
- August 1959: Introduction of the Austin Seven, Morris Mini-Minor and Morris Mini-Minor DL 2-door saloons, all with transversely mounted 848 cc engine and 4-speed manual gearbox.
- 1960: Introduction of the Austin Seven Countryman and Morris Mini-Minor Traveller 3-door estates, both with 848 cc engine from the saloon models. 116,667 cars built in the first full year of production.
- 1961: Introduction of the Austin Seven Super and Morris Mini-Minor Super 2-door saloons.
- 1961: Introduction of the Austin Mini Cooper and Morris Mini Cooper 2-door saloon, both with larger 997 cc 55 bhp (41 kW) engine.
- January 1962: All former Austin Seven models now officially called Austin Mini.
- March 1962: pvc seat covers replaced cloth upholstery on entry level model ("basic Mini").62
- 1962: "De Luxe" and "Super" designations discontinued. "Super de Luxe" designation introduced. Modified instrument panel now included oil pressure and water temperature gauges.62
- March 1963: Introduction of the Austin Mini Cooper 1071 S and Morris Mini Cooper 1071 S 2-door saloons, both with larger 1071 cc 70 bhp (52 kW) engine.
- 1964: Introduction of the Mini Moke.
- April 1964: Introduction of the Austin and Morris Mini-Cooper 998, Mini-Cooper 970 S and Mini-Cooper 1275 S. 1275 S models have 1275 cc 76 bhp (57 kW) engine. Automatic transmission available as an option for the 998 cc Austin Mini-Cooper 998 and 1275 S. Previous Mini-Cooper 997 and 1071 S models dropped.
- 1965: Mini Cooper 970 S discontinued.
- October 1965: Automatic transmission now available as an option on standard Austin/Morris Mini and Morris Mini SDL.
- October 1967: Mark 2 range launched with facelift and upgraded equipment. Austin Mini range as follows: 850, 1000, Cooper 998 and Cooper 1275 S 2-door saloons and 1000 Countryman 3-door estate. Morris Mini range as follows: 850, 850 SDL, 1000 SDL, Cooper 998 and Cooper 1275 S 2-door saloons and 1000 Traveller 3-door estate. Optional automatic transmission available on all Austin models (except 850) and Morris Mini 1000 SDL saloon.
- September 1968: Manual four speed gear box with synchromesh on all four forward ratios introduced.56
- March 1969: Launch of the Morris Mini K an Australian-only model manufactured in the Australian British Motor Corporation factory at Zetland NSW using 80% local content
- October 1969: Separate Austin and Morris badging now merged into Mini 850/Mini 1000 badging. Range reduced to: 850, 1000, Clubman, Cooper S and 1275 GT 2-door saloon and Clubman 3-door estate. Optional automatic transmission available on all except 1275 GT.
- April 1974: A heater became standard equipment on the entry level Mini 850 (having now already been included in the standard specification of the other models for some time).56
- 1980: The Mini becomes the Austin Mini.17
- 1988: The Austin Mini becomes the Rover Mini.17
From the Mark IV onward, many special limited-production editions of the Mini were offered. These included models that were created to commemorate racing victories or to celebrate an anniversary of the Mini marque. Limited editions generally came equipped with a unique combination of interior and exterior trim and special decals. Examples include Mini 1100 Special, Mini 1000 Special HL (only available in silver colour with black vinyl roof, black cloth upholstery seats with head restraints and walnut interior trim, for Portugal market only),63 Mini Rio, Mini Mayfair, Mini Park Lane, Mini Italian Job, Mini Cooper RSP, Mini Flame, Mini Red Hot, Mini Jet Black, Mini Racing and the Mini Monza.
From 1967 to 1979, Issigonis had been designing a replacement for the Mini in the form of an experimental model called the 9X.11 It was longer and more powerful than the Mini, but due to politicking inside British Leyland (which had now been formed by the merger of BMC's parent company British Motor Holdings and the Leyland Motor Corporation), the car did not reach production.
A number of prototypes produced for vehicles based on the Mini but which never saw production are held and sometimes displayed at the British Heritage Motor Centre museum at Gaydon, Warwickshire. These included the Twini, a re-engineered four-wheel-drive Moke with two engines—one at the front and another at the back; the Austin Ant, a second attempt to produce a four-wheel-drive vehicle, this time using a transfer case; and a two-seater convertible MG edition of the Mini, cancelled due to it being perceived as competition for the MG Midget.
In 1992, a project considering possible improvements to the Mini was started. Codenamed Minki ("Mini" plus K-Series engine), it included a redesigned dashboard, a two-piece rear door or tailgate instead of a boot, fold down rear seats, Hydragas suspension and a 3-cylinder version of the K-Series engine with a 5-speed gearbox.64
However, the project was cancelled by management within Rover, who decided that the cost of engineering the changes, and achieving compliance with modern crash testing standards, was too great for the production volumes that could be expected of an updated Mini.
In 1995 the idea to update the Mini again surfaced but this time with BMW management. As part of the process of deciding how to replace the Mini, a vehicle representing what the current Mini could have become, if it had been developed further over its production history, was commissioned.64 This resulted in the Minki-II, designed to house the 1.4L MPI K-Series engine with an extensive redesign inside, but without the original Minki's tailgate. The car had to be widened by 50mm and lengthened by 50mm to accommodate the new engine and gearbox, with Hydragas suspension and dashboard from a Rover 100. The Minki-II was used for Hydragas development work, this suspension being considered at the time for the R59 project, later to become the Mini Hatch.
BMC operated a Competition Department at Abingdon, Oxfordshire, under the control of Stuart Turner, which built specially prepared Minis (mostly based on Cooper and Cooper S versions) to compete in international rallies and other motorsport. This department played a key role in ensuring the Mini's huge success in motorsport throughout the 1960s, in particular, winning the Monte Carlo Rally in 1964, 1965 and 1967.
The Mini has won many awards over the years, perhaps the most notable include: "Car of the Century" (Autocar magazine 1995), "Number One Classic Car of All Time" (Classic & Sports Car magazine 1996) and "European Car of the Century" in a worldwide Internet poll run by the prestigious Global Automotive Elections Foundation in 1999. The Mini managed second place (behind the Model T Ford) for "Global Car of the Century" in that same poll.
In the end 5.3 million Minis were sold, making it the most popular British car ever made.
At its peak, the Mini was a strong seller in most of the countries where it was sold, with the United Kingdom inevitably receiving the highest volumes.
It dominated the mini-car market until the arrival of the Hillman Imp in 1963. It outsold the Imp. Competition arrived with the more modern and practical Vauxhall Chevette of 1975, but the Mini continued to sell well until its "replacement"—the Metro—arrived in 1980. By this time, the Mini's design had been overtaken by numerous more modern and practical vehicles.
Although the Metro did not replace the Mini, production figures for the Mini dipped during the 1980s, and interest in the design was not revived until the re-introduction of the Mini Cooper in 1989. This helped sales of the Mini through the 1990s, to the end of production on 4 October 2000.
A total of 1,581,887 Minis were sold in Britain after its launch in 1959. The last new one to be registered was sold in 2004, some four years after the end of production.65
Between 1960 and 1967, BMC exported approximately 10,000 left-hand drive BMC Minis to the United States. Sales were discontinued when stricter federal safety standards were imposed in 1968 and the arrival of the larger and more profitable Austin America. Mini sales fell in the 1967 calendar year and the U.S. importer was expecting the forthcoming Austin America to find a larger market. However, the America was also withdrawn in 1972 due to slow sales and the introduction of bumper height standards.
Issigonis designed the Mini with an emphasis on active safety. Asked about the crash worthiness of the Mini he said "I make my cars with such good brakes, such good steering, that if people get into a crash it´s their own fault".66 and "I don’t design my cars to have accidents".67
In July 1965 BMC announced that following "comments by safety experts" about the Mini's external doorhandles, these would be modified on new cars so that the gap between the handle and the door panel would be effectively closed.68
Nicholas Faith states in his book that Murray Mackay, one of the UK's leading motor vehicle crash and safety researchers, was critical of the pre-1967 Mini's passive safety features, including the protruding filler cap, the door latch, and the vulnerability of the passenger space to engine intrusion.66
The Mini was withdrawn from the American market because it could not meet the 1968 U.S. safety regulations and emission standards,69 and although often updated, not sufficiently to comply with U.S. regulations.70 It continued to be sold in Canada until 1979.6670
The Mini was modified during its production to improve its safety. In 1974 a prototype Mini experimental safety vehicle was built, the Mini Clubman SRV4. It featured a longer crumple zone, a "pedestrian friendly" front-end, run-flat tyres, strengthened door sills, extra internal padding and recessed door handles, the latter having been used earlier on Australian-built Minis owing to local laws.71 Jack Daniels, one of the original Issigonis team,72 is stated to have been working on further safety improvements for the Mini when he retired in 1977.66 Several times it was thought that safety regulations would stop Mini production73 Safety improved in 1996, with the introduction of airbags and side-impact bars.74 The Mini, challenged by increasingly demanding European safety and pollution standards, was planned by British Aerospace to be taken out of production in 1996, but BMW chose to invest to keep the Mini legal until the launch of the BMW MINI.75
In January 2007 Which? magazine listed the Mini City in its "Ten worst cars for safety (since 1983)" list, alongside other economical, lightweight, fuel-efficient cars like the Hyundai Pony 1.2L, Fiat Panda 900 Super, Suzuki Alto GL, Daihatsu Domino, Citroën AX 11 RE, Yugo 45 and 55, Peugeot 205 GL, and the Citroën 2CV6.76
A UK Department for Transport statistics publication, presenting estimates of the risk of driver injury in two-car injury collisions, based on reported road accident data, estimated that the 1990–2000 Mini was one of two small cars (the other being the Hyundai Atoz), which, with an estimated 84 per cent of drivers likely to be injured, presented the greatest risk of driver injury; the average risk for the small car category was 76 per cent.77
Several key events marked the 50th anniversary of the Mini in 2009.
On 17 May, a world record parade of 1,450 Minis congregated at Crystal Palace as part of a London to Brighton run.79 The following week, 10,000 Minis and 25,000 people attended an anniversary party at Silverstone Circuit in Northamptonshire.80
Between 7–10 August 2009 approximately 4000 minis from around the world congregated at Longbridge Birmingham to celebrate the 50th anniversary.
On 26 August 2009, smallcarBIGCITY launched in London to provide sightseeing tours of the capital in a fleet of restored Mini Coopers.81
MINI is both the name of a subsidiary of BMW, and a car produced by that subsidiary since 2001. The car is marketed as a "retro" redesign of the original Mini, which was manufactured by the British Motor Corporation and its successors from 1959 to 2000. To distinguish it from its predecessor (the 'classic Mini'), the brand name for the new car is MINI (written in capital letters). It is often called 'The BMW MINI', 'The New MINI', or simply 'MINI'. The MINI is manufactured in Cowley, Oxford, United Kingdom, in what was historically the Morris car plant.
- List of Mini-based cars
- List of best-selling vehicle nameplates
- London to Brighton events
- List of Mini limited editions
- Mini (marque)
- The Complete USA Press Pack, mk1-performance-conversions.co.uk Retrieved on 2 November 2012
- Also known as : Mini – Classic, www.aronline.co.uk Retrieved on 9 November 2012
- "Mini information page". Archived from the original on 15 April 2009.dead link
- Cardew (Ed), Basil (October 1969). "Wolseley Hornet". Daily Express Motor Show Review 1969 on 1970 Cars (London: Daily Express Newspaper): 54.
- Reed, Chris (2003). Complete Classic Mini 1959–2000. Orpington: Motor Racing. ISBN 1-899870-60-1.
- Reed, Chris (1994). Complete Mini: 35 Years Of Production History, Model Changes, Performance Data. Croydon: MRP. ISBN 0-947981-88-8.
- Clausager, Anders (1997). Essential Mini Cooper. Bay View Books location=Bideford, Devon. ISBN 1-870979-86-9.
- Buckley, Martin; Rees, Chris (2006). Cars: An encyclopedia of the world's most fabulous automobiles. Hermes House. ISBN 1-84309-266-2. "The BMC Mini, launched in 1959, is Britain's most influential car ever. It defined a new genre. Other cars used front-wheel drive and transverse engines before but none in such a small space."
- "This Just In: Model T Gets Award", James G. Cobb, The New York Times, 24 December 1999
- Strickland, Jonathan. "How the MINI Cooper Works". Auto.howstuffworks.com. Retrieved 20 July 2010.
- Wood, Jonathan (2005). Alec Issigonis: The Man Who Made the Mini. Breedon Books Publishing. ISBN 1-85983-449-3.
- Nahum, Andrew (2004). Issigonis and the Mini. Icon Books. ISBN 1-84046-640-5.
- "Future of Monte Carlo rally in doubt". BBC. 21 January 1966.
- Austin Seven - Mini, www.austinmemories.com Retrieved on 16 June 2013
- Michael Sedgwick & Mark Gillies, A-Z of Cars 1945–1970, 1986
- Adams, Keith; Nicholls, Ian. "Mini development story Pt.2". AROnline.
- MINI – A MAJOR FASHION ITEM, www.retrocarsmag.com Retrieved on 3 May 2013
- Coulter, Jeremy (1989). The World's Great Cars. London: Marshall Cavendish. ISBN 0-86283-726-X.
- "1959–2000 BMC Mini – Classic Mini Cooper – Automobile Magazine". Automobilemag.com. Retrieved 11 October 2010.
- "Engines of the ADO15 and family". Mgcars.org.uk. Retrieved 11 October 2010.dead link
- "Trade Mark & Copyright Attorneys in Ashby-de-la-Zouch". Verymark.info. Retrieved 11 October 2010.dead link
- "Happy Events (Editorial)". The Autocar (3315): 45. 1959.
- B.M.C. Baby Cars Set Up A New Standard In Cheap Motoring. FROM OUR MOTORING CORRESPONDENT. The Times Wednesday, 26 August 1959; pg. 10; Issue 54549
- "621 AOK 50th anniversary | Mini news and updates". MiniWorld. 8 May 2009. Retrieved 11 October 2010.dead link
- "List of Vehicles – The National Motor Museum Trust". Nationalmotormuseum.org.uk. Retrieved 11 October 2010.
- "mini_brochures". Mk1-performance-conversions.co.uk. Retrieved 5 December 2010.
- "Discussion in Bond Owners Club forums". Bondownersclub.co.uk. Retrieved 11 October 2010.
- Mini Road Test Book: Mini Gold Portfolio 1959–69. ISBN 1-85520-300-6.
- "Production numbers by model". Miniresource.com. Retrieved 11 October 2010.
- Laban, Brian (2005) The Little Book of MINI
- Golding, Rob (2007). Mini 50 Years. Motorbooks. p. 33. ISBN 0-7603-2627-4. "Initial sales were worryingly slow. Then to the rescue came the rich and fashionable ... The Beatles, Princess Margaret with Lord Snowdon, Peter Sellers and Mary Quant, Harry Secombe and Graham Hill were all seen around town in Minis."
- Clarke, R. M. (1995). Mini Road Test Book: Mini Gold Portfolio 1969–80. Brooklands Books. ISBN 978-1-85520-301-3.
- Clarke, R. M. (2005). Mini Road Test Book: High Performance Minis Gold Portfolio 1960–73. Brooklands Books. ISBN 978-1-85520-317-4.
- Hornet and Elf Workshop Manual, Part No. AKD 4062C, BMC Service Limited, Cowley, Oxford, England.
- "Riley Elf", Motorbase. Retrieved on 21 June 2008.
- , Body Service Parts List, Riley Elf, Wolseley Hornet, British Leyland Motor Corporation Limited, BMC Service division, Cowley, Oxford, England.
- Kitcher, Nigel and Davy, Rick. "The Mini Moke", The Unmutual Prisoner Vehicle Guide. Retrieved on 20 June 2008.
- Mini Road Test Book: Mini Moke Gold Portfolio 1964–94. ISBN 1-85520-240-9.
- "Dependable in service – Austin Mini van and pickup"dead link. ‘’Mini Pick-up International’’ Retrieved on 21 June 2008.
- "Scanned copy of the Mini K brochure". Aronline.co.uk. Retrieved 11 October 2010.dead link
- Oz Mini Models, The Mini Experience, OZ50 Special Issue, February 2011, page 35
- 1970 Mini K Van Ad – Australiadead link Retrieved on 19 September 2011
- by R. M. Clarke (2005). Mini Road Test Book: Mini Cooper Gold Portfolio 1961–71. Cobram, U.K.: Brooklands Books. ISBN 1-85520-052-X.
- "Monte Carlo Automobile Club". Acm.mc. Retrieved 11 October 2010.
- Browning, Peter (1971). The Works Minis. Henley on Thames: Foulis. ISBN 0-85429-128-8.
- "BBC Future of Monte Carlo rally in doubt". BBC News. 21 January 1966. Retrieved 11 October 2010.
- "Henri Toivonen family connections". Thruxton.f9.co.uk. Retrieved 11 October 2010.
- "Legend of the Mini". Classic Motorsports (109): 8. 2004.
- Parnell, John (1993). Original Mini-Cooper: The Restorers Guide To All MKL, II, And III Models. Bideford: Bay View. ISBN 1-870979-32-X.
- Howard, Geoffrey (11 February 1971). "10,000 mile long-term report: Mini Clubman Estate". Autocar 134 (3907): 22–23.
- "Auto Test Mini 850". Autocar 138 (4012): 8–12. 19 April 1973.
- History of the Clubman GT Retrieved from miniexperience.com.au on 11 February 2010
- www.clubmangt.com.audead link
- Green Book Price & Model Guide, July–August 1983, page 71
- Green Book Price & Model Guide, July–August 1983, page 60
- "Buying secondhand: Minis". Autocar 145 (4172): 74–77. 23 October 1976.
- Mini Gold Portfolio 1981–1997. ISBN 1-85520-385-5.
- "Mini – mk III (1969–2000) history, pictures". Histomobile.com. 5 October 2010. Retrieved 2013-03-03.
- "1978: Motability gets moving in the UK". BBC News. 25 July 1978.
- Suderman, Art (1991-08-30). "Venezuelan firm making Mini for Latin America". Calgary Herald (Alberta, Canada: CanWest Interactive): F4.
- "Final Longbridge factory Mini sold at auction". BBC News Online (BBC). 28 July 2013. Retrieved 28 July 2013.
- "Used Car Test: 1968 Morris Mini Mk I de luxe". Autocar 134 (3908): 51–53. 18 February 1971.
- Mini (marque)
- "Austin Memories: Minki". www.austinmemories.com. Retrieved 2 February 2010.
- "icLiverpool – Recession-proof wise-buys revealed". Icliverpool.icnetwork.co.uk. 17 March 2009. Retrieved 5 December 2010.
- Faith, Nicholas (1997). Crash: The limits of car safety. Boxtree. ISBN 0-7522-1192-7.
- McLean, Jack. Road Safety – Better Cars, Better Roads or Just Better Drivers?.dead link
- "News and Views: Safety changes to Minis". Autocar: 230. 30 July 1965.
- Strickland, Jonathan (21 March 2007). "HowStuffWorks "How the MINI Cooper Works"". Auto.howstuffworks.com. Retrieved 5 December 2010.
- Anderson, Kevin (21 June 2002). "Mini mania big in US". BBC News. Retrieved 24 February 2008.
- "Safety First: the SSV/SRV cars". AROnline. Retrieved 24 February 2008.dead link
- "Leading MG engineer dies at home". BBC News. 30 November 2004. Retrieved 24 February 2008.
- "History of the Mini". British Motor Heritage Limited. Retrieved 2013-04-08.
- "Rover Mini Saloon (88-01)". Parker's.
- "Last Classic Mini Closes an Automotive Era". The New York Times. 5 October 2000.
- "Car safety problems persist". Which?. 4 January 2007. Retrieved 24 February 2008.dead link
- "Cars: Make and Model: The Risk of Driver Injury in Great Britain: 2000–2004". UK Department for Transport. Retrieved 24 February 2008.dead link
- "Royal Mail – British Design Classics". Royalmail.com. Retrieved 15 July 2011.dead link
- "Largest parade of Mini cars". Guinness World Records. Retrieved 14 June 2013.
- "Car Scoop – Photo Album from MINI's 50th Anniversary Festivities at Silverstone". Carscoop.blogspot.com. Retrieved 15 July 2011.
- "About smallcarBIGCITY...". Smallcarbigcity.com. Retrieved 15 July 2011.
|Wikimedia Commons has media related to Mini vehicles.|
- Austin Memories – History of Austin and Longbridge
- Heritage Motor Centredead link – A collection of British heritage cars and artefacts, including many historic Minis, Mini prototypes, and an Issigonis collection.
- Mini on the Open Directory Project
- Issigonis and the 1,000,000th mini (Pathé newsreel)
|Mini vehicle timeline 1959–present|
|Two-door saloon / Two-door hatch||Mk I||Mk II||Mk III-Mk VII||Mini Hatch|
|Two-door saloon||Clubman & 1275GT|
|Cooper||Mk I Cooper||Mk II Cooper||RSP||Cooper||Cooper|
|Cooper S||Mk I Cooper S||Mk II Cooper S||Mk III Cooper S||ERA||Cooper S|
|Convertible||Rover Cabrio||Mini Convertible|
|Utility vehicle||Moke (UK)||Moke (Australia)||Moke (Portugal)|
|Estate||Traveller & Countryman||Clubman|
|Pickup||Mini Pickup||Mini 95|
|Van||Mini Van||Mini 95||Clubvan|
|See also: Concept cars · A-Series engine · Tritec engine · Prince engine · List of Mini based cars|
|British Leyland – car companies and marques|
|BMH||BLMC / British Leyland||Jaguar
|Rover||Rover Company||Rover Company||Rover Company||Austin Rover Group
Land Rover Group (BL plc)
|Rover Group (BAe)||Rover Group
|MG Rover Group (PVH)|
|Land Rover||Ford (PAG)|
|Standard||Standard||Standard Triumph||Leyland Motors||British Motor Heritage|
|MG||Morris Garages (MG)||Rover Group
|MG Rover Group (PVH)||SAIC
|Vanden Plas||Vanden Plas|
|Princess||BMC||BLMC / British Leyland|
|Austin-Healey||Austin (BMC) & Donald Healey|