Propagation of uncertainty
||This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (March 2011)|
- This article deals with the propagation of uncertainty via algebraic manipulations. For the propagation of uncertainty through time, see Chaos theory#Sensitivity to initial conditions.
In statistics, propagation of uncertainty (or propagation of error) is the effect of variables' uncertainties (or errors) on the uncertainty of a function based on them. When the variables are the values of experimental measurements they have uncertainties due to measurement limitations (e.g., instrument precision) which propagate to the combination of variables in the function.
Most commonly the error on a quantity, Δx, is given as the standard deviation, σ. Standard deviation is the positive square root of variance, σ2. The value of a quantity and its error are often expressed as an interval x ± Δx. If the statistical probability distribution of the variable is known or can be assumed, it is possible to derive confidence limits to describe the region within which the true value of the variable may be found. For example, the 68% confidence limits for a one-dimensional variable belonging to a normal distribution are ± one standard deviation from the value, that is, there is approximately a 68% probability that the true value lies in the region x ± σ.
Let be a set of m functions which are linear combinations of variables with combination coefficients .
and let the variance-covariance matrix on x be denoted by .
Then, the variance-covariance matrix of f is given by
This is the most general expression for the propagation of error from one set of variables onto another. When the errors on x are uncorrelated the general expression simplifies to
where the x superscript is merely notation, not exponentiation. Note that even though the errors on x may be uncorrelated, the errors on f are in general correlated; in other words, even if is a diagonal matrix, is in general a full matrix.
The general expressions for a single function, f, are a little simpler.
Each covariance term, can be expressed in terms of the correlation coefficient by , so that an alternative expression for the variance of f is
In the case that the variables x are uncorrelated this simplifies further to
When f is a set of non-linear combination of the variables x, an interval propagation could be performed in order to compute intervals which contain all consistent values for the variables. In a probabilistic approach, the function f must usually be linearized by approximation to a first-order Taylor series expansion, though in some cases, exact formulas can be derived that do not depend on the expansion as is the case for the exact variance of products.1 The Taylor expansion would be:
where J is the Jacobian matrix. Since f 0 is a constant it does not contribute to the error on f. Therefore, the propagation of error follows the linear case, above, but replacing the linear coefficients, Aik and Ajk by the partial derivatives, and . In matrix notation, 2
That is, the Jacobian of the function is used to transform the rows and columns of the covariance of the argument.
Neglecting correlations or for independent variables yields a common formula among engineers and experimental scientists to calculate error propagation, the variance formula:3
where represents the standard deviation of the function , represents the standard deviation of , represents the standard deviation of , and so forth. One practical application of this formula in an engineering context is the evaluation of relative uncertainty of the insertion loss for power measurements of random fields.4
It is important to note that this formula is based on the linear characteristics of the gradient of and therefore it is a good estimation for the standard deviation of as long as are small compared to the partial derivatives.5
Any non-linear differentiable function, f(a,b), of two variables, a and b, can be expanded as
In the particular case that , . Then
Error estimates for non-linear functions are biased on account of using a truncated series expansion. The extent of this bias depends on the nature of the function. For example, the bias on the error calculated for log x increases as x increases since the expansion to 1+x is a good approximation only when x is small.
In the special case of the inverse where , the distribution is a reciprocal normal distribution and there is no definable variance. For such inverse distributions and for ratio distributions, there can be defined probabilities for intervals which can be computed either by Monte Carlo simulation, or, in some cases, by using the Geary–Hinkley transformation.6 The statistics, mean and variance, of the shifted reciprocal function, , where however exist in a principal value sense if the difference between the shift or pole, , and the mean is real. The mean of this transformed random variable is then indeed the scaled Dawson's function .7 In contrast, if the shift is purely complex, the mean exists and is a scaled Faddeeva function whose exact expression depends on the sign of the imaginary part, . In both cases, the variance is a simple function of the mean .8 Therefore, the variance has to be considered in a principal value sense if is real while it exists if the imaginary part of is non-zero. Note that these means and variances are exact as they do not recur to linearisation of the ratio. The exact covariance of two ratios with a pair of different poles and is similarly available .9 The case of the inverse of a complex normal variable , shifted or not, exhibits different characteristics.7
For highly non-linear functions, there exist five categories of probabilistic approaches for uncertainty propagation;10 see Uncertainty Quantification#Methodologies for forward uncertainty propagation for details.
This table shows the variances of simple functions of the real variables , with standard deviations , covariance and precisely known real-valued constants .
For uncorrelated variables the covariance terms are zero. Expressions for more complicated functions can be derived by combining simpler functions. For example, repeated multiplication, assuming no correlation gives,
For the case we also have Goodman's expression1 for the exact variance: for the uncorrelated case it is
and therefore we have:
Absolute Error Variance 15
We can calculate the uncertainty propagation for the inverse tangent function as an example of using partial derivatives to propagate error.
where is the absolute uncertainty on our measurement of . The derivative of with respect to is
Therefore, our propagated uncertainty is
where is the absolute propagated uncertainty.
Given the measured variables with uncertainties, I±σI and V±σV, the uncertainty in the computed quantity, σR is
- Accuracy and precision
- Automatic differentiation
- Delta method
- Errors and residuals in statistics
- Experimental uncertainty analysis
- Interval finite element
- List of uncertainty propagation software
- Measurement uncertainty
- Significance arithmetic
- Uncertainty quantification
- Goodman, Leo (1960). "On the Exact Variance of Products". Journal of the American Statistical Association 55 (292): 708–713. doi:10.2307/2281592. JSTOR 2281592.
- Ochoa1,Benjamin; Belongie, Serge "Covariance Propagation for Guided Matching"
- Ku, H. H. (October 1966). "Notes on the use of propagation of error formulas". Journal of Research of the National Bureau of Standards (National Bureau of Standards) 70C (4): 262. ISSN 0022-4316. Retrieved 3 October 2012.
- Arnaut, L. R. (December 2008). "Measurement uncertainty in reverberation chambers - I. Sample statistics". NPL Technical Report TQE 2, 2nd. ed., sec. 126.96.36.199 (National Physical Laboratory) TQE (2): 52. ISSN 1754-2995.
- Clifford, A. A. (1973). Multivariate error analysis: a handbook of error propagation and calculation in many-parameter systems. John Wiley & Sons. ISBN 0470160551.page needed
- Hayya, Jack; Armstrong, Donald; Gressis, Nicolas (July 1975). "A Note on the Ratio of Two Normally Distributed Variables". Management Science 21 (11): 1338–1341. doi:10.1287/mnsc.21.11.1338. JSTOR 2629897.
- Lecomte, Christophe (May 2013). "Exact statistics of systems with uncertainties: an analytical theory of rank-one stochastic dynamic systems". Journal of Sound and Vibrations 332 (11): 2750–2776. doi:10.1016/j.jsv.2012.12.009.
- Lecomte, Christophe (May 2013). "Exact statistics of systems with uncertainties: an analytical theory of rank-one stochastic dynamic systems". Journal of Sound and Vibrations 332 (11). Section (4.1.1). doi:10.1016/j.jsv.2012.12.009.
- Lecomte, Christophe (May 2013). "Exact statistics of systems with uncertainties: an analytical theory of rank-one stochastic dynamic systems". Journal of Sound and Vibrations 332 (11). Eq.(39)-(40). doi:10.1016/j.jsv.2012.12.009.
- S. H. Lee and W. Chen, A comparative study of uncertainty propagation methods for black-box-type problems, Structural and Multidisciplinary Optimization Volume 37, Number 3 (2009), 239-253, DOI: 10.1007/s00158-008-0234-7
- "Strategies for Variance Estimation". p. 37. Retrieved 2013-01-18.
- Fornasini, Paolo (2008), The uncertainty in physical measurements: an introduction to data analysis in the physics laboratory, Springer, p. 161, ISBN 0-387-78649-X
- Harris, Daniel C. (2003), Quantitative chemical analysis (6th ed.), Macmillan, p. 56, ISBN 0-7167-4464-3
- "Error Propagation tutorial". Foothill College. October 9, 2009. Retrieved 2012-03-01.
- Lindberg, Vern (2009-10-05). "Uncertainties and Error Propagation". Uncertainties, Graphing, and the Vernier Caliper (in eng). Rochester Institute of Technology. p. 1. Archived from the original on 2004-11-12. Retrieved 2007-04-20. "The guiding principle in all cases is to consider the most pessimistic situation."
- Bevington, Philip R.; Robinson, D. Keith (2002), Data Reduction and Error Analysis for the Physical Sciences (3rd ed.), McGraw-Hill, ISBN 0-07-119926-8
- Meyer, Stuart L. (1975), Data Analysis for Scientists and Engineers, Wiley, ISBN 0-471-59995-6
- A detailed discussion of measurements and the propagation of uncertainty explaining the benefits of using error propagation formulas and Monte Carlo simulations instead of simple significance arithmetic
- Uncertainties and Error Propagation, Vern Lindberg's Guide to Uncertainties and Error Propagation.
- GUM, Guide to the Expression of Uncertainty in Measurement
- EPFL An Introduction to Error Propagation, Derivation, Meaning and Examples of Cy = Fx Cx Fx'
- uncertainties package, a program/library for transparently performing calculations with uncertainties (and error correlations).
- soerp package, a python program/library for transparently performing *second-order* calculations with uncertainties (and error correlations).
- Joint Committee for Guides in Metrology (2011). JCGM 102: Evaluation of Measurement Data - Supplement 2 to the "Guide to the Expression of Uncertainty in Measurement" - Extension to Any Number of Output Quantities (Technical report). JCGM. Retrieved 13 February 2013.