||This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (January 2011)|
Relativistic electromagnetism is a modern teaching strategy for developing electromagnetic field theory from Coulomb's law and Lorentz transformations. Though Coulomb's law expresses action at a distance, it is an easily understood electric force principle. The more sophisticated view of electromagnetism expressed by electromagnetic fields in spacetime can be approached by applying spacetime symmetries. In certain special configurations it is possible to exhibit magnetic effects due to relative charge density in various simultaneous hyperplanes. This approach to physics education and the education and training of electrical and electronics engineers can be seen in the Encyclopædia Britannica (1956), The Feynman Lectures on Physics (1964), Edward M. Purcell (1965), Jack R. Tessman (1966), W.G.V. Rosser (1968), Anthony French (1968), and Dale R. Corson & Paul Lorrain (1970). This approach provides some preparation for understanding of magnetic forces involved in the Biot–Savart law, Ampère's law, and Maxwell's equations.
- 1 Einstein's motivation
- 2 Introduction
- 3 Uniform electric field — simple analysis
- 4 More rigorous analysis
- 5 The field of a moving point charge
- 6 The origin of magnetic forces
- 7 Calculating the magnetic field
- 8 See also
- 9 Notes and references
- What led me more or less directly to the special theory of relativity was the conviction that the electromotive force acting on a body in motion in a magnetic field was nothing else but an electric field.
This statement by Einstein reveals that he investigated spacetime symmetries to determine the complementarity of electric and magnetic forces.
Purcell argued that the question of an electric field in one inertial frame of reference, and how it looks from a different reference frame moving with respect to the first, is crucial to understand fields created by moving sources. In the special case, the sources that create the field are at rest with respect to one of the reference frames. Given the electric field in the frame where the sources are at rest, Purcell asked: what is the electric field in some other frame?
He stated that the fundamental assumption is that, knowing the electric field at some point (in space and time) in the rest frame of the sources, and knowing the relative velocity of the two frames provided all the information needed to calculate the electric field at the same point in the other frame. In other words, the electric field in the other frame does not depend on the particular distribution of the source charges, only on the local value of the electric field in the first frame at that point. He assumed that the electric field is a complete representation of the influence of the far-away charges.
Alternatively, introductory treatments of magnetism introduce the Biot–Savart law, which describes the magnetic field associated with an electric current. An observer at rest with respect to a system of static, free charges will see no magnetic field. However, a moving observer looking at the same set of charges does perceive a current, and thus a magnetic field.
Consider the very simple situation of a charged parallel-plate capacitor, whose electric field (in its rest frame) is uniform (neglecting edge effects) between the plates and zero outside.
To calculate the electric field of this charge distribution in a reference frame where it is in motion, suppose that the motion is in a direction parallel to the plates as shown in figure 1. The plates will then be shorter by a factor of:
than they are in their rest frame, but the distance between them will be the same. Since charge is independent of the frame in which it is measured, the total charge on each plate is also the same. So the charge per unit area on the plates is therefore larger than in the rest frame by a factor of:
The field between the plates is therefore stronger by this factor.
Consider the electric field of a single, infinite plate of positive charge, moving parallel to itself. The field must be uniform both above and below the plate, since it is uniform in its rest frame. We also assume that knowing the field in one frame is sufficient for calculating it in the other frame.
The plate however could have a non zero component of electric field in the direction of motion as in Fig 2a. Even in this case, the field of the infinite plane of negative charge must be equal and opposite to that of the positive plate (as in Fig 2b), since the combination of plates is neutral and cannot therefore produce any net fields. When the plates are separated, the horizontal components still cancel, and the resultant is a uniform vertical field as shown in Fig 1.
If Gauss's law is applied to pillbox as shown in Fig 1, it can be shown that the magnitude of the electric field between the plates is given by:
where the prime (') indicates the value measured in the frame in which the plates are moving. represents the surface charge density of the positive plate. Since the plates are contracted in length by the factor
then the surface charge density in the primed frame is related to the value in the rest frame of the plates by:
But the electric field in the rest frame has value σ / ε0 and the field points in the same direction on both of the frames, so
The E field in the primed frame is therefore stronger than in the unprimed frame. If the direction of motion is perpendicular to the plates, length contraction of the plates does not occur, but the distance between them is reduced. This closer spacing however does not affect the strength of the electric field. So for motion parallel to the electric field E,
In the general case where motion is in a diagonal direction relative to the field the field is merely a superposition of the perpendicular and parallel fields., each generated by a set of plates at right angles to each other as shown in Fig 3. Since both sets of plates are length contracted, the two components of the E field are
where the y subscript denotes perpendicular, and the x subscript, parallel.
These transformation equations only apply if the source of the field is at rest in the unprimed frame.
A very important application of the electric field transformation equations is to the field of a single point charge moving with constant velocity. In its rest frame, the electric field of a positive point charge has the same strength in all directions and points directly away from the charge. In some other reference frame the field will appear differently.
In applying the transformation equations to a nonuniform electric field, it is important to record not only the value of the field, but also at what point in space it has this value.
In the rest frame of the particle, the point charge can be imagined to be surrounded by a spherical shell which is also at rest. In our reference frame, however, both the particle and its sphere are moving. Length contraction therefore states that the sphere is deformed into an oblate spheroid, as shown in cross section in Fig 4.
Consider the value of the electric field at any point on the surface of the sphere. Let x and y be the components of the displacement (in the rest frame of the charge), from the charge to a point on the sphere, measured parallel and perpendicular to the direction of motion as shown in the figure. Because the field in the rest frame of the charge points directly away from the charge, its components are in the same ratio as the components of the displacement:
In our reference frame, where the charge is moving, the displacement x' in the direction of motion is length-contracted:
The electric field at any point on the sphere points directly away from the charge. (b) In a reference frame where the charge and the sphere are moving to the right, the sphere is length-contracted but the vertical component of the field is stronger. These two effects combine to make the field again point directly away from the current location of the charge. (While the y component of the displacement is the same in both frames).
However, according to the above results, the y component of the field is enhanced by a similar factor:
whilst the x component of the field is the same in both frames. The ratio of the field components is therefore
So, the field in the primed frame points directly away from the charge, just as in the unprimed frame. A view of the electric field of a point charge moving at constant velocity is shown in figure 4. The faster the charge is moving, the more noticeable the enhancement of the perpendicular component of the field becomes. If the speed of the charge is much less than the speed of light, this enhancement is often negligible. But under certain circumstances, it is crucially important even at low velocities.
In the simple model of events in a wire stretched out horizontally, a current can be represented by the evenly spaced positive charges, moving to the right, whilst an equal number of negative charges remain at rest. If the wire is electrostatically neutral, the distance between adjacent positive charges must be the same as the distance between adjacent negative charges.
Assume that in our 'lab frame' (Figure 5), we have a positive test charge, Q, outside the wire, traveling parallel to the current, at the speed, v, which is equal to the speed of the moving charges in the wire. It should experience a magnetic force, which can be easily confirmed by experiment.
Inside 'test charge frame'(Fig. 6), the only possible force is the electrostatic force Fe = Q * E because, although the magnetic field is the same, the test charge is at rest and, therefore, cannot feel it. In this frame, the negative charge density has Lorentz-contracted with respect to what we had in lab frame because of the increased speed. This means that spacing between charges has reduced by the Lorentz factor with respect to the lab frame spacing, l:
Thus, positive charges have Lorentz-expanded (because their speed has dropped):
Both of these effects combine to give the wire a net negative charge in the test charge frame. Since the negatively charged wire exerts an attractive force on a positively charged particle, the test charge will therefore be attracted and will move toward the wire.
For , we can concretely compute both,2 the magnetic force sensed in the lab frame
and electrostatic force, sensed in the test charge frame, where we first compute the charge density with respect to the lab frame length, l:
and, keeping in mind that current , resulting electrostatic force
which comes out exactly equal to the magnetic force sensed in the lab frame, .
The lesson is that observers in different frames of reference see the same phenomena but disagree on their reasons.
If the currents are in opposite directions, consider the charge moving to the left. No charges are now at rest in the reference frame of the test charge. The negative charges are moving with speed v in the test charge frame so their spacing is again:
The distance between positive charges is more difficult to calculate. The relative velocity should be less than 2v due to special relativity. For simplicity, assume it is 2v. The positive charge spacing contraction is then:
relative to its value in their rest frame. Now its value in their rest frame was found to be
So the final spacing of positive charges is:
To determine whether l(+) or l(-) is larger we assume that v << c and use the binomial approximation that
After some algebraic calculation it is found that l(+) < l(-), and so the wire is positively charged in the frame of the test charge.3
One may think that the picture, presented here, is artificial because electrons, which accelerated in fact, must condense in the lab frame, making the wire charged. Naturally, however, all electrons feel the same accelerating force and, therefore, identically to the Bell's spaceships, the distance between them does not change in the lab frame (i.e. expands in their proper moving frame). Rigid bodies, like trains, don't expand however in their proper frame, and, therefore, really contract, when observed from the stationary frame.
A moving test charge near a wire carrying current will experience a magnetic force dependent on the velocity of the moving charges in the wire. If the current is flowing to the right, and a positive test charge is moving below the wire, then there is a force in a direction 90° counterclockwise from the direction of motion.
Calculation of the magnitude of the force exerted by a current-carrying wire on a moving charge is equivalent to calculating the magnetic field produced by the wire. Consider again the situation shown in figures. The latter figure, showing the situation in the reference frame of the test charge, is reproduced in the figure. The positive charges in the wire, each with charge q, are at rest in this frame, while the negative charges, each with charge −q, are moving to the left with speed v. The average distance between the negative charges in this frame is length-contracted to:
where is the distance between them in the lab frame. Similarly, the distance between the positive charges is not length-contracted:
Both of these effects give the wire a net negative charge in the test charge frame, so that it exerts an attractive force on the test charge.
- Formulation of Maxwell's equations in special relativity
- Special relativity
- Liénard-Wiechert potentials
- Wheeler-Feynman absorber theory
- Shankland, R. S. (1964). "Michelson-Morley Experiment". American Journal of Physics 32: 16–81. Bibcode:1964AmJPh..32...16S. doi:10.1119/1.1970063.
- A. French (1968)
- Edward M. Purcell (1965,85) Electricity and Magnetism: Berkeley Physics Course Volume 2, published by McGraw-Hill, 2nd Ed.
- Daniel V. Schroeder (1999) Purcell Simplified: Magnetism, Radiation, and Relativity
- Hans de Vries (2008) Magnetism as a relativistic side effect of electrostatics.
- Jack R. Tessman (1966) "Maxwell - Out of Newton, Coulomb, and Einstein" American Journal of Physics 34:1048–55.
- W.G.V. Rosser (1968) Classical Electromagnetism via Relativity: an alternative approach to Maxwell's equations, Plenum Press, New York.
- Anthony French (1968) Special Relativity, Norton, New York (See chapter 8).
- Dale Corson & Paul Lorrain (1970) Electromagnetic Fields and Waves, W.H. Freeman, San Francisco (See chapter 6).
- David Jefferies (2000) Electromagnetism, Relativity, and Maxwell.
- Richard Easther http://easther.physics.yale.edu/Richard_Easther/Relativistic_E_and_M.html Retrieved 2011-01-23